Question about Nortel Norstar 16-Line PBX Speakerphone

1 Answer

I need to use the 3 way conference caller, how do I set this up?

Posted by on

  • Anonymous Oct 15, 2008

    sdfv

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Better late than never.... here is the process
make a call in the normal way to the first person ie dial access code for a line out and the number. tell that person to hold on when he answers.
now press the conference button.dial the access code for a line out and the number of the second person.when the second person answers press the conference button again,now all 3 should be in the call.i hope this can help

Posted on Dec 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I identify extensions, transfer calls, conference call, change time.


To identify the extensions: if its a display set, press feature 00 and the screen will show the extension number. press feature 00 to exit programming.
If its a non-display set access the intercom and call a display set.The extension number will be displayed on the screen that is recieving the call.

To transfer a call: while your on the call to be transfered, press the transfer button and then the extension number of the person you wish to transfer the call toand hang up.

For a conference call:while on the line with the first caller,press the conf key (the caller will be placed on hold) place a call to your second party when they answer press the conf key again. all 3 parties will be bridged(you + the 2 lines) to get rid of one of the callers press thier line and feature 6 (conference drop)

Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#103"
the display should say system time and the current programmed time
enter the new time in 24 hour format
press feature "00" to logout

Jan 05, 2010 | AT&T Lucent MLS-12D Phone

1 Answer

How to make conference call


Place your first caller on hold, call the second person to on the conference, press the conf key (or feature 3) and press the held linewith the first caller.

Nov 14, 2009 | NorStar T7316E Telephone

2 Answers

Three party conference call


Once you receive your first call Press conference button. your first call will automaticaly be on hold. Press a line button to dial second number. Once call is connected Press conference button and you will have 3 way conference.
To add more PeoPle into conference Press conference button again and select a new line. Dial the number and Press conference button to connect everyone to that conference.

HoPe this helPs

Jul 17, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

HOW TO DO A CONFERENCE CALL


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]


  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

May 14, 2009 | NorStar M7324 Telephone

1 Answer

Call conferencing


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]


  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

May 11, 2009 | NorStar Meridian M7310 Phone

1 Answer

Unable to use conference button


Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]
  • Establish a conference call between yourself and two other parties.
    1. Make or answer the first call.
    2. Put the first call on hold.
    3. Make or answer the second call.
    4. After the second call is connected, press [Feature] [3].
    5. Press the line or intercom button of the first held call.
    6. Press [Rls] to end the conference call
  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
  • To put a conference on hold:
    • Press [Hold]. The other two callers can still talk to each other.
  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To disconnect one party:
    • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
    • Press the line or intercom button of the remaining caller to resume your conversation.
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Mar 11, 2009 | Nortel Meridian M7208 Corded Phone

1 Answer

I have a NorStar M7310 phone -I am on a conf call - how do I mute the line where the other parties cant here


Conference [Feature] [3]


  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call


  • To split a conference:
    • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
  • To independently hold two calls:
    • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Dec 04, 2008 | NorStar M7310 Corded Phone

2 Answers

Conference Calls


To establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press feature button then 3.
5. Press the line or intercom button of the first held call (not required on the
T7100/M7100 telephone).
6. Press Release to end the conference call.
To remove yourself from a conference permanently
(unsupervised conference):
Press feature buton then 70. The other two callers remain connected. (Some
external lines may not support this feature. See your system
administrator.)
To put a conference on hold:
Press hold. The other two callers can still talk to each other.
To split a conference:
Press the line or intercom button of one caller to consult privately while
the other caller is on hold. To re-establish the conference, press
feature button then 3.
To disconnect one party:
Press the line or intercom button of the caller you want to disconnect,
then press Release button. Press the line or intercom button of the remaining
caller to resume your conversation.

Aug 22, 2008 | Nortel T7316E 2-Line Corded Phone

2 Answers

Conference Calls/Transfer


Conference [Feature] [3]

  • Establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call

  • To remove yourself from a conference permanently (unsupervised conference):
    • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)

May 21, 2008 | NorStar Meridian M7310 Phone

1 Answer

Uniden DECT 6.0 cordless phones


Here are some steps that should help. I don't think that you can Conference call You can hold a 3-way conversation (conference call) between your handset, an external caller and another internal handset user. During an external call: 1 Press . The external caller is put ?on-hold?. 2 Press or to select name, number or the handset you want to have a conference call with and press or key. The called handset will ring. 3 When the called handset answers, press to start your conference call. 4 Any handset can press at any time to leave the conference call. It looks like you can use the multiple system sets together, but the system is not designed to do what you are asking for. Please repost with any other comments or questions. Please rate this solution through fix-it. Thank you.

Jun 30, 2007 | Uniden DECT1080-2 Phone

Not finding what you are looking for?
Nortel Norstar 16-Line PBX Speakerphone Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nortel Phones Experts

dan4261

Level 1 Expert

14 Answers

kakima

Level 3 Expert

96683 Answers

Cindy Wells

Level 3 Expert

4761 Answers

Are you a Nortel Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...