Question about Philips PDAs

1 Answer

I have a philips 7380 shaver and all the shaving head have come out

Posted by on

1 Answer

Grow a beard

Posted on Sep 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Braun shaver swtch will not shut off


HI,

I suggest you to manually remove the battery from your shaver and then replace it back after 30min.This will solve the issue.

Let me know if you need anymore help.

Sep 30, 2008 | PDAs

3 Answers

My new sonicare toothbrush has gone all wobbly.... on the bottom the following numbers to help you identify the model, etc: 080416 HX6910 the vibrating pin onto which the brush attaches is no longer...


Your suggestion worked! I took a small common screwdriver, carefully pried on the bottom plate on each side, a little at a time, and the whole motor assembly with O-ring, came out in one piece. There it was, a small phillips screw, in this sort of universal joint assembly at the top. I tightened it up, careful, its pretty small, won't stand too much torque, but it's tight now, and I think you saved me $100 or so, mine was getting so sloppy I expected it to fall apart any day, now it feels as tight as new.
Thanks so much!
Steven Fisher

Nov 07, 2008 | PDAs

2 Answers

The batteries in my Panasonic ES8003 need replacing but not sure how to remove them, any help please


Love my ES8003 but the batteries last maybe 1 charge.

I called Panasonic after a fruitless search on the web for batteries and they had none.
They did refer me to Turnpike Appliances which has changed its name or been swallowed up by
smallappliances .com.

If you go to the smallappliances.com site you can search Panasonic men's shavers and find parts for the ES8003. Unfortunately, batteries aren't listed. You need to CALL (1-800-628-3911) smallappliances.com in order for them to special order (meaning you can't return them) the batteries.

Cost of the batteries with shipping is about $42(USD) to my location in California.

To access the batteries, look at the bottom of the razor, there are two very small phillips head screws that attach the base piece of the razor to the body case/internals. The base piece can only attach one way so look at it carefully before unscrewing to make sure you know which way to reattach it. A set of jeweler's screwdrivers is what you need. I actually had better luck removing the phillips head screws with a flat head screw driver...

After removing the screws the base piece should fall away. Lift the razor internals out by grabbing the body case with one hand and, with the other hand holding the foil, lift straight up and out removing the internals from the body case. Note which way the internals came out of the body case so you can put them back in correctly. Gently set the internals down flat on a towel, etc. There are some delicate electrical connections at the bottom you don't want to break. Notice that the two batteries have polarity poles of different lengths. Make sure you note which end is longer, which end is shorter and replace the batteries the same way.

After installing the new batteries, put the razor back together the opposite way you took it apart making sure the rubber seal/plastic trim piece that keeps water out (just below the foil) are seated correctly.

Charge batteries and shave away!

Oct 10, 2008 | PDAs

1 Answer

Philishave speed xl wont charge


Check to see if the battery is dead. It won't charge if the battery is dead. Sounds silly because that's what a charger is for right?

Or, it could be the charger itself. Is it getting voltage to the terminals? Maybe it's the shavers terminals not making good contact to be charged.

Jul 27, 2008 | Philips PDAs

1 Answer

I need the norelco 4401 LC shaver PCB diagram


.
I have this same norelco shaver. I can draw a diagram of this circuit.

Jul 02, 2008 | Philips PDAs

2 Answers

How to replace the battery in Braun Model #5314 shaver


remove shaver head (2 screws)

remove 2 screws at the bottom of unit.
with coin, turn plug socket.
now pull carefully cover.
you'll need a welder to replace the 1.2v nimh rechargeable battery.



May 03, 2008 | RIM BlackBerry Pearl 8100

1 Answer

The phone wont turn on


Dont turn it on that way, use the key which has some symbol like this on it, most probably on the top or the side of your phone.
c401f17.jpg Thank you
Please Rate.

Dec 22, 2007 | Nokia 7610 Handheld

Not finding what you are looking for?
PDAs Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips PDAs Experts

k24674

Level 3 Expert

7987 Answers

kakima

Level 3 Expert

96518 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Philips PDA Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...