posted by tlongo on Jul 15, 2008
My TV turns on, sound is good but after a couple of mintues the picture goes completely RED. The Power/Standby button blinks 5x's.
Best Solution
posted on Jul 15, 2008
There seems to be a dry solder joint on the video amplifier IC. The red picture is cause by a defective video amplifier IC(IC701) that is located on the red CRT assembly.
This repair might not be a DIY due to the danger of working around devices that produce high voltages in excess of 32KV.
Let me know if you need further assistance.
This repair might not be a DIY due to the danger of working around devices that produce high voltages in excess of 32KV.
Let me know if you need further assistance.
Rating Locked! (?) tlongo has rated this solution as Helpful
Suggest a new solution for this problem
Post a New problem for Sony KP-51WS510 51 in. Rear
Email this problem
Post a New problem for Sony KP-51WS510 51 in. Rear
Email this problem
Can you Help with these Projection Televisions problems?
Sony KP-51WS510 51 in. Rear Projection...
How did you remove the front...
How did you remove the front...
I just read your entry... Answer This...
Sony KP-51WS510 51 in. Rear Projection...
Sony Wide Screen Projection TV...
Sony Wide Screen Projection TV...
Hope you can help me out - My... Answer This...
Sony KP-51WS510 51 in. Rear Projection...
Sony rear projection tv
Sony rear projection tv
TV blinks 9 times on Stand By... Answer This...
Sony KP-51WS510 51 in. Rear Projection...
Projection Tv Problem
Projection Tv Problem
I have a 3 year old projection... Answer This...
Sony KP-51WS510 51 in. Rear Projection...
Shawdowed picture
Shawdowed picture
My sony cast as shadow of the... Answer This...
Repair Service
Find Projection TV Repairman Near You:
