Question about Washing Machines

1 Answer

AEG Oko Lavamat 86700

There was a smell of burning and the power tripped while the machine was spinning and one minute left. We checked the water filter and it was fine. Tried turning it on again and it was making very funny noises and error code CA came up. Anyone have any ideas please? Or is it wrecked? It's 11 years old.

Thanks a million

Chris

Posted by on

  • chrisoz5 Jul 17, 2008

    Thanks pawson1, we called out a local guy, and it was the brushes on the motor as you suggested but when they went, it also fried the motherboard and something else too maybe. The guy rang AEG and they dont make those motherboards anymore.



    He has suggested purchasing a new one, considering the Electrolux ewn14991w.



    Thank you for your help

    Chris

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 41 Answers

Check the carbon brushes on the motor as when they are worn arcing occurs and this could trip the electric and the smell could be the plastic brush holders getting hot due to the arcing

Posted on Jul 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the filter for die AEG lavamat 538 washing machine and how do you clean it?


Hello,

The only filter/screen I am familiar with is the one in the hoses the supply hot and cold water to your machine. They should be checked once in a while but I have never found much in them.

However, the manual for your machine is located here:
AEG OKO LAVAMAT 538 Operating Instructions Manual

Best wishes,
Joe

Aug 24, 2016 | AEG Washing Machines

1 Answer

Aeg oko lavamat 72600 update, ce error code showing any idea?


error code ce is a faulty water distributor fault . you have to replace the top part of the soap dispensor compartment. sometimes you can hear a clicking noise when its trying to operate

Jul 09, 2010 | AEG Lavamat 72640 Front Load Washer

1 Answer

AEG Lavamat 76400 during spin cycle blows a fuse


its not the heat element its the water pump i would say it has gone to ground try disconnecting the water pump if the fuse does not trip then replace the water pump

Jul 03, 2010 | Washing Machines

1 Answer

About mid cycle, a significant amount of water leaks out of the bottom. No error message comes up and the machine continues functioning. Machine is AEG oko lavamat 72640


Could the machine be overfilling due to a faulty pressure switch (controls the amount of water in the drum). Splits in the door seal or broken pipes?

Jan 25, 2010 | AEG Lavamat 72640 Front Load Washer

1 Answer

CA Error Code - AEG OKO LAVAMAT 86700


c-a error message poped-up.washer stop working.............please help.

Sep 15, 2008 | Whirlpool Calypso GVW9959K Top Load Washer

6 Answers

Aeg oko_lavamat 508- not enough water


Have law level water problem in my clothes washing AEG Lavamant OKO 508.

Jun 01, 2008 | Kenmore Elite 45986 Front Load Washer

1 Answer

Need the manual for Aeg oko lavamat 74630


Dear Biyo,

Please download the manual from here. (simply press left click)

http://www.manualshark.org/manualshark/files/5/pdf_10516.pdf

I have sent you an email as well.

Regards,
EngineerGR

Apr 09, 2008 | Washing Machines

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...