Question about Altec Lansing Inmotion-IM600 (0021986954446) Docking Station

3 Answers

Remote control does not work - Altec Lansing Inmotion-IM600 (0021986954446) Docking Station

Posted by on

  • 5 more comments 
  • Anonymous Nov 27, 2008

    how do you get the battery out?

  • ronjankrebs Dec 06, 2008

    What is the battery I should get for the wirelss remote

  • Anonymous Dec 22, 2008

    battery is stuck! SOOO FRUSTRATING

  • simonly Dec 27, 2008

    I just bought a IM600, and the remote is not working after I put the battery in.

  • BigBankHanK Dec 28, 2008

    Same problem with the remote for my brand new iM413 - bought a new battery - did not fix the problem...

  • Anonymous Dec 31, 2008

    My remote is new, battery should work! Frustrating!!!

  • Anonymous Feb 16, 2009

    my remote control dos not work


3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The battery sits in a little plstic "basket". I fixed my problem by placing a very narrow piece of electrical tape at the back of the basket. This forces the battery forward by the thickness of the tape. This allowed for a more positive connection of the battery to the power pick-ups.


Posted on Dec 29, 2008

  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

I agree with Dark-Viper.

Posted on Jun 15, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 505 Answers

Replace Battery
Battery's Don't Last Long

Posted on Jul 18, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can you work this without a remote control

yes you can but with some limited functions only ..
Base unit has a few controls on it,that's all you can control.
If you can not locate the remote ,try to order thru customer service of Logitech..

Oct 22, 2010 | Logitech Pure-Fi Dream Speaker Remote...

1 Answer

Logitech pure-fi Anywhere 2 Remote Control not working. Tried a new battery & still not working? any suggestions?

I received my anywhere one week ago, the remote didn't work, reracking several times didn't help, I replaced the battery with minus to plus vv. and then put it in again properly, working flawlessly since. Logitech won't advise this method but it's worth trying.

May 21, 2010 | Logitech 984-000057 Pure-Fi Anywhere 2...

1 Answer

Remote control buttons won't work

you may have a fualty remote you may want to bring it back theres nothing you can really do

Oct 08, 2009 | Logitech Pure-Fi Express Plus...

6 Answers

Bose Sound Dock remote control - only volume works

My remote worked perfectly until I changed the battery. The original battery was CL 2032 and I replaced it with DL 2032. After replacing the battery, only the volume control works. The off button will only fade the sound while the button is depressed. Release the button, and the volume returns to the original level and the unit remains On.
None of the other buttons work.
If you've found a solution, please post it here.

Oct 03, 2009 | Bose SoundDock® (Black) Docking Station...

1 Answer

Does anyone know the remote control code for the Philips DC912/37

In the instructions for the remote there is normally a method where you can sort of autosearch on it if the codes do not work. This method can take a long time but it has worked for me in the past on a tv which had no makers name on it so I was literally searching through every make and every code but it got there in the end. This should work with patience.

Jun 18, 2009 | Philips DC912/37 iPod Docking Shelf Bar...

2 Answers

Remote Control Altec Lansing IM600 - Battery

Turn the remote upside down. At the bottom, there is a slot that opens the battery tray and a series of grooves that are part of a clip that releases the tray. Insert the fingernail of your thumb into the grooves and the fingernail of your index finger into the slot. Ease the grooves (clip) toward the middle of the remote and slide the tray out. There is a ridge in the tray that matches the battery only when the battery is in the proper position. Slide the tray back in. If the remote doesn't work, you've probably inserted the battery in the wrong position.

Dec 31, 2008 | Altec Lansing Inmotion-IM600...

1 Answer

Remote won't control my 4th generation ipod nano

Hey I figured it out. When you bought the 4th generation ipod nano it came with it's own dock insert. It fits perfectly and fixes everything, including the remote issues. Now my only problem is I have a black ihome and a white insert :( Good luck!

Dec 26, 2008 | Dual Electronics ihome iH9BR iH9 Alarm...

1 Answer

Remote issues

i had the same problem and my iPod is a 3rd generation nanno. this system was made before my ipod was made so it doesn't work on the ipod controls, at least that was what the person on the ilive costomer service phone line said.

Dec 26, 2008 | GPX Ilive Travel Dock Black (IC2807BLK)...

Not finding what you are looking for?
Altec Lansing Inmotion-IM600 (0021986954446) Docking Station Logo

466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Altec Lansing MP3 Player Accessories Experts

Sharps s

Level 1 Expert

21 Answers

Cindy Wells

Level 3 Expert

4757 Answers


Level 3 Expert

60960 Answers

Are you an Altec Lansing MP3 Player Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides