Question about Washing Machines

1 Answer

My servis easilogic 1300 washer/drier has lost temperature control and is boiling everything. The condenser has to be emptied every day as it produces so much extra condensate.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Dear Fixya team,

The hot water pipe was attached to the cold inlet and the cold supply to the hot water inlet of the machine. The domestic supply was also set to 80 centigrade in my daughters flat so all the machine settings were over ridden by the supply temperature.

Thank you for offering me a paid subscription and giving me a laugh.You are obviously an American company.

Regards
Rooderick

Posted on Jul 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to clean the wash powder and conditioner compartment on Servis Easilogic 1300rpm?


There will be a release catch somewere, but if you cant find it, boil a kettle and pour it in to the compartment, then follow with more warm water till it is clean.

Sep 25, 2012 | Washing Machines

1 Answer

Can you please e-mail me an instruction guide for a servis quartz A 1300 rpm waher drier. Thank you


Hi from retired Englishman in SW France,
Sorry, this forum is not able to supply any type of manual, installation instructions, electrical or schematic diagrams direct; it's just made up of ordinary guys and gals, probably at home and from all over the world, with experience of addressing problems and giving guidance for free on the web ;-0)
You will need to type into your search engine/web browser '(make model number) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct ;-0)
If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.
p.s. how's that for speed of solution ;-0)

Jun 06, 2011 | Washing Machines

1 Answer

LG Tromm washing machine model WM2487HWM has an error code. First letter looks like a capital E without the top horizontal line. second letter is an E


Hi from retired Englishman in SW France,
That's 'te' standing for temperature error/ heating error. Before you call an engineer try emptying the washer then pouring a couple of kettles of boiling water into the drum and leaving for 30 minutes then see. Another thing is to empty a couple of packets of limescale remover into the drum together with a couple of kettles of boiling water (again!) and leaving overnight. It possibly needs de-scaling anyway ;-0) If these fail it will be an engineer call, sorry ;-0(
Good luck, John C

Mar 22, 2011 | LG WM2487H Front Load Washer

1 Answer

I have a servis easilogic 1300rpm.model number M9503s.It is 3 yrs old and has been working perfectly until i went to use it today.all the lights have come on on the control panel but nothing responds.whats...


It is probably a control board fault, unless you can find a specific fault, then normally the only solution is to replace the board.
Hope this nhelps.

Dec 15, 2009 | GE WPXH214A Front Load Washer

1 Answer

Door does not open after a wash cycle


Hi

the door lock is you problem. just replace and should be back to normal.

regards

Mar 01, 2009 | AEG Lavamat 16810 Front Load Washer/Dryer

1 Answer

Goot a servis easilogic 1300 but cant work tumble dryer as no setting manual with it


CLICK HERE



Please download asap - as it is stored on my personal FTP site, and will be removed in 48 hours.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 27, 2009 | Washing Machines

1 Answer

Got a hoover washer /dryer wdm 1300 , it wouldnt empty properly, watched the impellor on the pump and some times it would run and then stop , a quick flick with a screw driver and away it went again ,also...


HI CHECK THESE....
Step 1: Make sure the washer is receiving power. Check the cord, the plug, and the outlet. If a wall switch controls the outlet, make sure the switch is working. Look for blown fuses or tripped circuit breakers at the main entrance panel. If the unit is receiving power and still won't run, press the reset button on the control panel (if the washer has one).
Step 1: Make sure the washer is receiving power. Check the cord, the plug, and the outlet. If a wall switch controls the outlet, make sure the switch is working. Look for blown fuses or tripped circuit breakers at the main entrance panel. If the unit is receiving power and still won't run, press the reset button on the control panel (if the washer has one).
Step 3: Make sure that both water faucets are turned on and that the drain and soap-saver return hoses are properly extended, without kinks. If the washer has a water-saver button, make sure the button is depressed; water may not circulate through the filter nozzle if the basket is not full and the button is not depressed.
Step 4: To make sure the water is the proper temperature, check the temperature selector switches on the control panel to make sure they're properly set. Also check the water heater temperature control. It should be set no lower than 120 degrees F.

THANKS

Sep 12, 2008 | Washing Machines

3 Answers

Have a Servis 1500 Easilogic washing machine. Decided last night that it won't do the spin cycle. Any ideas? Many thanks! Peter.


i used to deliver servis machines and exchange faulty ones, the most common problem was the regulator (the wash selection dial) they are not very sturdy and frequently break down. have you tried just a spin, without a wash.

Jul 01, 2008 | Washing Machines

2 Answers

Bosch WVF 2402 Washer Drier Steam Problem


Hello All

Problem solved by clearing out the condensate container which on inspection was full of dried up fluff and dead tissues! This is not a ****that is mentioned in the manual and access to the bin is pretty tricky so I suspect there are lots of machines out there with the same problem waiting to happen.

Access was gained by taking the top of the machine off, removing the dryer motor and then scraping out the muck using a wire coathanger and a vacuum cleaner.

Many thanks

Andy Wray

Mar 08, 2008 | Bosch Classixx WVF 2402 Front Load...

1 Answer

Fabric softener compartment problem.


Squeee, It's been more than a year since you posted this so I guess you must know the answer. It sounds like a Visit from an engineer(?) I've got exactly the same problem with a Servis Easilogic 1500 and would appreciate knowing what you had to do to resolve the issue.

Jun 11, 2006 | Ariston Technologies LBE12X Ariston

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

132 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...