At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Assuming you have already checked all the fuses, you probably have a failed Body Control Computer, which manages operation of climate control, radio, lighting, alarms, and a host of other functions. Your Chrysler technician can confirm that. Be warned: a BCC can cost a LOT of money, as in many '90s Chrysler products, they had to be programmed at the factory for your specific vehicle; a junkyard unit will not work in any car but the one it came in.
Your flasher is located in the front seating area, driver side, under dash, under knee protector, mounted in multi-purpose fuse panel. I hope this helps you and good luck.
there is no manual reset other than locking and unlocking the passenger or driver door with a key. the alarm is also disarmed each time the ignition key is turn to run, if u are locked out and have tried these methods to disarm the security system them there is a problem and the dealer must scan the Body Control Module (BCM) to determine what that might be.
If you are having this problem the first thing to do is disconnect the battery, then connected back and see if the alarm is working again. If is not working replace battery on your alarm keypad, otherwise you will need to replace the whole alarm system. Good luck.
headlights are changed from within the engine compartment... if it's the side the battery is on.. it will likely need to be removed first... do not touch the bulbs with your fingers as that shortens their life.
Robert
Please take a moment to rate this solution ... thanks
×