Question about Refrigerators
Fan not working .temp stays at 72 ,only 5 monthes old ,what the hay ??
Posted on Nov 01, 2008
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Sep 11, 2014 | Refrigerators
Aug 15, 2011 | Refrigerators
refrigerator is not cooling properly it can be due to a defrost timer, which is
causing the fridge to go into defrost cycle. Usually it takes 45-60 minutes for
refrigerator to come out of defrost cycle. If the timer
is bad then it will not come out of defrost cycle and
can result in this kind of issues. It can also occur due to a bad defrost thermostat,
it allows current to pass through it at temperatures of 20 to 30 degrees
Fahrenheit and prevents current from passing through it at 40 to 60 degrees.
This is difficult to test, though, because it takes a prolonged, very-cold
temperature to turn it on. The defrost thermostat is
snapped onto the top portion of the evaporator. The thermostat sends
temperature information to the processor. The defrost heater must be replaced
when replacing the thermostat.
1. Remove the lower fan duct work from the evaporator cover.
2. Remove the 1/4-in. evaporator cover screws and remove the evaporator cover.
3. Disconnect the defrost thermostat wiring connector.
4. Remove the defrost thermostat from the evaporator.
Hope this helps...please post back for further
Jul 17, 2011 | Refrigerators
Jul 11, 2011 | Hotpoint HSS25IFMCC / HSS25IFMWW Side by...
Mar 30, 2011 | Refrigerators
Mar 23, 2011 | GE Refrigerators
Mar 22, 2011 | Frigidaire Refrigerators
Mar 22, 2011 | GE Profile Stainless Bottom-Freezer...
May 30, 2008 | Koolatron (785169015699)
May 05, 2008 | GE PTC22SBMR Top Freezer Refrigerator
548 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: