Question about Symphonic ST420FF 20" TV

1 Answer

I have lost my tv remote for my syphonic tv

Ok well i lost my remote for my tv so i ahve bean using my vcr but it takes up to much space so i found my old jensen universal remote (sc-540) but i cant find the code list if you can help me that would be great thanks ~JOHN~ I lost my remote too and i have a universal but i need the code. The model number for my tv is ST420FF. Thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 133 Answers

One website gives instructions on how to use the AUTO CODE SCAN feature of your remote, even if you don't have the code numbers. Take the following steps to access this info.
Step 1) Type REMOTECODELIST.COM into the Google searchbox, and click on GO or SEARCH.
Step 2) Once you are on the website, scroll down the page until you see JENSEN in big red letters, on the left hand side.
Step 3) Look under JENSEN for SC-540 ( in purple letters), and click on SC-540.
Step 4) Look on the right side of the page for instructions on how to do an AUTO CODE SCAN.

Hope this helps you out. Please take a moment to rate this solution, by using the rating system below. Thanks.

Posted on Jul 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to change sylvania tv to video without remote


I was able to get the Sylvania TV to accept a different input (the remote was lost) by connecting the DVD to a Sony VCR using composite RCA jacks then connecting that to the TV. You'll need two 3-jack (yellow, white, red composite) cables - cheap at any store. Here;s how:
1. Connect RCA output jacks from the DVD to the input female receptacles of the VCR (first cable).2. Connect output jacks from VCR to the female input jacks on TV (second cable). 3. Turn on all equipment (VCR, DVD, TV)4. Switch the VCR to "Line 1" (for my Sony VCR, this shows up as "L1") by pressing the TV/VCR button on the VCR remote (which I did have).
Your system should now work.
The principle is to "fool" the TV into thinking that it's primary input is through the RCA composite A/V jacks rather than the cable connection. No need to disconnect the cable at any time. Any functioning VCR should work well as long as you have the remote for that device. Remember, connect output on the DVD to the input on the VCR, then the output on the VCR to the input jacks on the back of the TV. If you have the connectors on the TV, VCR, and DVD, component cables should work as easily. Remember, output from the DVD goes to the input of the VCR. Theoutput from the VCR (for which you DO have the remote) goes to the input side of the TV.
Good luck!

Apr 07, 2012 | Sylvania Standard (CRT) Televisions

1 Answer

Lost remote


use an universal remote, it comes with manufacturers codes for your TV

Aug 14, 2009 | Philips Magnavox 27MS343S 27" TV

1 Answer

I lost the code book for my one in all remote.


Go to the setup area and start with code 001. It will take a while, depending on the number, but that should find it. It is found when the TV responds.

Mar 17, 2009 | Standard (CRT) Televisions

1 Answer

JVC television-lost old remote-have universal /can't add channels


I don't have an answer for your question.

However, I do have a suggestion. You can hook up a vcr to your tv, then put the tv on channel 3 or 4 (whichever the vcr is set for) and change the channels through your vcr. You have to have the cable go first to your vcr and then out to the tv.

Dec 19, 2008 | JVC AV-27530 27" TV

2 Answers

Daewoo DVN-14F6N


Same problem...Went to Goodwill Store, they usually have a large basket of remotes. I found a Daewoo remote for a TV only, HOWEVER on the bottom it has a AIR/CABLE button. The remote doesn't say Daewoo on it only..."Remote Controller R-25B03". The rest of the button of course work with the TV portion of the DVN-14F6N.

Sep 17, 2008 | Daewoo DVN-14F6N 13" TV

1 Answer

Lost remote and rca universal remote no can be programed


I used the remote control code of "69" for Thompson which makes GE & RCA according to another post. This worked to program the remote of my GO Video DVD-VCR for the TV

Dec 29, 2007 | Proscan PS27113 TV

8 Answers

Remote code orion tv/vcr # tvcr0950bw


I have an Orion TV/VCR combo with a Philis Universal remote. I had to use the Sansui codes for the combo. My code for my Orion was 632.

Dec 06, 2007 | Orion1934 19" TV

1 Answer

Connecting my tv and vcr so i can use the vcr remote control


You can always push "03" on a universal remote programmed to work your TV. A better solution is to connect the devices properly. You shouldn't use the tuner inputs for a VCR/DVD player, or you will get a poorer picture and no stereo sound. See the instruction manual for your player and TV. Use a stereo audio/video cable to connect them and select the proper input. The instructions will hopefully clarify this.

Oct 16, 2007 | Philips Magnavox 27MS343S 27" TV

2 Answers

I have lost my tv remote for my syphonic tv


Coud you please send me your tv model so I would help you more!! Patrick

Aug 27, 2007 | Symphonic ST419E TV

Not finding what you are looking for?
Symphonic ST420FF 20" TV Logo

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Symphonic Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

Cindy Wells

Level 3 Expert

4757 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

Are you a Symphonic Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...