Question about RCA P61960 61" Rear Projection Television

1 Answer

The color contast is not right

The lighting is fading,

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

Check all three CRT modules for cracks. It would be between the CRT pins and the connector where the wires plug into the board. You will be losing heater voltage and the pins you need to check will probably be marked with H. Let me know if that put you on track.

Posted on Oct 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Color fading from left to right


I'm sorry to hear that you're having this issue with your TV. It may be an inverter board, or something internal having to do with the backlighting of the unit. I would recommend having the unit inspected by a technician.

Nov 06, 2013 | Philips Projection Televisions

1 Answer

JVC LT 42 E 488


the mirror tunnel mirrors need replacement they r faded then ensure the tech resets the opticals in the light engine accurately to ensure image sharpness

Jul 19, 2013 | Projection Televisions

1 Answer

Hls6767w color fade off in 20min then turn itself off


the color wheel is faulty needs replacement the intermittent colors na fading is caused by the speed being not in sync with the dmd due to wear these and the fans are the only moving parts

Oct 23, 2012 | Samsung HL-S6767W DLP TV

1 Answer

Sreen has perfect color and then fades to a cloudy/faded picture. occassionally picture will go full color then very yellow,very red, cloudy/faded.


Does it come and go? Or is it like this all the time? If you bump the side of the TV does it change the symptoms? Thanks Lou

Aug 27, 2011 | Mitsubishi WS-55613 55" Rear Projection...

1 Answer

Our DLP Samsung started making loud humming noises and the color is faded. Is it the color wheel and if it is can I clean it?


Color Wheel and no you cannot clean it, you have to replace it, this wheel turns 9,000rpms per second and if not replaced and you keep playing set with it like that it can fall into tiny pieces causing Damage to light engine which then light engine cost $950.00
Call Encompass Parts for Color Wheel #part number
1-800-638-3328

Jan 08, 2010 | Projection Televisions

1 Answer

The screen looks faded. The colors are right, but


take off the front of the set, and clean the lens as well as the mirrors inside the tv set
Techman

Dec 14, 2009 | Sony KP-53XBR200 53" Rear Projection...

1 Answer

The color has faded . I replaced the bulb the problem persists!


Light Engine is Bad, If you had said TV was making loud whistling sound then it would be Bad color Wheel

Sep 27, 2009 | Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

Having problem with getting the color and contrast right?


Good Day;
Turn your color down all the way, do you get a good Black and White picture with good black, white and grays? If not your picture tube may be going bad. It can be adjusted sometimes to get a 'better' picture.
If picture is a good B&W; adjust britness level: 50% > contast: > 90/95 % >color: 50%.
Good Luck, big IRISH.

Sep 25, 2008 | Projection Televisions

1 Answer

JVC I'Art Pro, Color Fade


sounds like two separate problems. color fade ?
green gun/band = bad convergence ic

Dec 18, 2007 | JVC AV-56WP30 56" Rear Projection...

Not finding what you are looking for?
RCA P61960 61" Rear Projection Television Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

D. E. Hev

Level 3 Expert

1059 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a RCA Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...