Question about JVC DR-MV1S DVD Recorder/VCR

Open Question

Jvc dr-mv5su won't turn on, lights just flash

Posted by on

  • Anonymous Aug 31, 2008

    I have the same Problem my unit flashes loading loading, when powers up then it says reset reset , nothing i do allows me to use the unit , jvc says i need to bring it in for repair, i have it a while but never used it.is there a way to reset the unit manually

×

3 Suggested Answers

SOURCE: JVC DR-M10 DVD Recorder not working

Contact JVC @ 800-252-5722, the "loading" is a known bug and they will fix this defect at n/c even if it's out of warranty period.

Posted on Mar 31, 2008

  • 1 Answer

SOURCE: jvc dr-mv5su blue power light blinks on and off whole machine fr

Throw the unit away its a piece of ****!

Posted on Jun 14, 2009

fieldy14
  • 456 Answers

SOURCE: My unit (just all of a sudden) will not turn on by

Check the power supply and all the capacitors throughout the unit, i have found that this is normally the case when an item will not power on and is displaying red LEDS. Good Luck.

Posted on Nov 15, 2009

Testimonial: "Thanks for the prompt reply. I do not have the necessary equipment for testing my JVC DR-MV5SU. Is it wworth having repaired? "

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 55 inch JVC tv,today the screen went black but still have sound, also the buttons on the back wont work, but the channel down button turns it on and off? What is wrong with it?


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary..

Jan 15, 2017 | JVC Televison & Video

1 Answer

MY JVC TV WON TURN ON LT 42X579


The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts. .

Jan 13, 2017 | JVC Televison & Video

1 Answer

Where can I find a user manual for jvc hr s 5900


Try Googling (jvc)(hr s 5900)(manual) without parens.

Jan 09, 2017 | JVC Televison & Video

1 Answer

Tv will not turn on, orange light flashing


Could be an open internal fuse or power supply failure

Jan 07, 2017 | Televison & Video

1 Answer

When playing commercial DVD's, my DR-MV150B starts to stall. It stops with the picture on the televsion screen, but can't see the rest of the movie. Any thoughts? The disc does eject.


Try cleaning the laser with a bud, if not it's either the spindle motor or laser assembly,
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 02, 2017 | JVC DR-MV150B DVD Recorder/VCR

1 Answer

Sony bravia shuts off


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Aug 30, 2014 | Televison & Video

1 Answer

When CRT JVC TV is first turned on, the image looks shrunken and warped, eventually, the image looks fine. What to fix?


SMPS fault. Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. Do a search by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/
Check all the electrolytic capacitors.

May 26, 2014 | Televison & Video

1 Answer

No Video Or Sound - Stand By Light Flashes 5 Times


If the tv was made before December 2008, there is a capacitor settlement from a class action lawsuit by Samsung. Supposedly (at no charge) they will send a repairman to replace the capacitors.

Nov 27, 2013 | Televison & Video

1 Answer

Would like to know the codes for a LG tv, Sony tv, and a TOSHIBA DVD ?


How to Program


Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

Mar 27, 2013 | Televison & Video

1 Answer

My alba telly won't turn on it glee ps flashing blue what should I do


Sounds like your power supply inside the unit is bad. What is the make and model?

Mar 11, 2013 | Televison & Video

Not finding what you are looking for?
JVC DR-MV1S DVD Recorder/VCR Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71126 Answers

Jaime Hernandez

Level 3 Expert

2275 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...