Question about Haier 42EP24S 42 in. EDTV-Ready Plasma Television

Open Question

No picture Haier 42EP24S

Where can i buy the upgrade kit part no. tv-3940-04

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: TV-3940-01 upgrade kit ordered. What about power supplies?

i have same problem with my plasma, haier was absolutly no help. could you email me tech manual and instructions for upgrade kit. thanks

Posted on May 16, 2008

kevin000
  • 1847 Answers

SOURCE: HAIER 42EP24S BLACK SCREEN NO SOUND

you can download the manual from ...

http://www.tradebit.com/filedetail.php/3078275-Documents-eBooks

Thank for using Fixya.

Posted on Jul 03, 2008

SOURCE: info on TV-3940-01 kit for haier

i have the haier upgrade kit. originally sears was to repair my 42ep24s but the kit was in back order and after a long wait and several phone calls, sears decided to replace my tv. two weeks later, the kit arrived infront of my door. now i have a new tv and an upgrade kit. email me if interested. dm_eslava@yahoo.com

Posted on Jul 26, 2008

  • 1 Answer

SOURCE: haier 42hp25bat no pic and sound

solo se ven lines en colores noda mas

Posted on Sep 10, 2008

  • 61 Answers

SOURCE: upgrade kit part: TV-3940-01 - But the part is backordered for three months. $150.00

I beleive this comes directly from manufacturer.becasue thsi Kit cotains a upgraed E-prom.
before you order any kit check it this unit has been upgraded before? if this unit upgraded before you dont need to change kit again.
I would say either y-sus or z-sus could be the problem..

Good luck
Dals123

Posted on Oct 09, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have the 73738 DLP 3D ready TV. Purchased the Mitsubishi starter kit with glasses and emitter and the TV is saying it's not compatible. Just get an ugly pink haze or shadow effect over the picture. The...


There is new software upgrade for the TV that should fix the problem you will need a usb memory stick and go to http://www.mitsubishi-tv.com/3dupgrade or you can call mitsibichi consumer relations and buy a usb stick with the upgrade on it.The new software version is 012.06 or higher

Jan 21, 2011 | Mitsubishi WD73738 73 in 3D HDTVReady LCD...

2 Answers

Upgrade kit pdf file


Heard lots of problem with similar case for this tv,you need to buy upgrade kit from the haier itself, there also available at Sears you will get instruction sheet will contain all information all you need is screw driver to replace the parts Control Board TV-5210-39, Y-SUS TV-5210-35, Z-SUSj TV-5210-37, New EPROM Chip 2006 version TV-2455-03, Upgrade Label TV-4050-08 and Haier Service Bulletin SB-TV-0003 containing the instructions to replace the boards yourself.


Good luck..

Sep 15, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

2 Answers

TV-3940-01 Upgrade Kit


Yes. Make sure you follow the instructions that came with the kit.

By the way - where did you get kit? I am trying to find one. I even contacted HAIER China.

Nov 03, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Upgrade kit part: TV-3940-01 - But the part is backordered for three months. $150.00


I beleive this comes directly from manufacturer.becasue thsi Kit cotains a upgraed E-prom.
before you order any kit check it this unit has been upgraded before? if this unit upgraded before you dont need to change kit again.
I would say either y-sus or z-sus could be the problem..

Good luck
Dals123

Sep 30, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

2 Answers

Info on TV-3940-01 kit for haier


Sorry, the Haier Upgrade Kit is SOLD. My original post is months old and the kit sold right away. Good luck to you on locating another one.

Jul 14, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

42 ' PLASMA TV MODEL NUMBER P42LV6-T1


Haier for sure recognizes the model. It's been a problem since produced. To correct the problem you'll need an upgrade kit. I'll attach the upgrade instructions and part number for the kit. Try resetting back to factory specs as noted at the bottom of instructions. Follow the procedure to a "T" when you see two menus pop up use the one on the right. Good luck! http://service.haieramerica.com/documents/SB-TV-0003.pdf

May 28, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

1 Answer

Haier Upgrade Kit


In one of my earlier post I posted the phone number where to order the board. However they were on back order so I got lucky an located the upgrade kit on Ebay. I'll post the part number for the kit and boards you need. TV-3940-01 is a kit that contains the following parts:
Control Board – TV-5210-39
Y-Sus – TV-5210-35
Z-Sus – TV-5210-37
EEprom (2006 version) - TV-2455-03

Apr 13, 2008 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

27 Answers

Black Screen - Haier 42EP24S 42 in. EDTV-Ready Plasma Television


Mine did the same thing, I called Haier and reprted the problem. there is some kind of kit to remedy the problem where 3 boards are replaced. The repair performed by Sears service center was in home and cost me nothing for parts or a sevice call. Sadly now the monitor is working agin but with some interference of some kind. I called Sears service and they are coming back.

Sep 28, 2006 | Haier 42EP24S 42 in. EDTV-Ready Plasma...

Not finding what you are looking for?
Haier 42EP24S 42 in. EDTV-Ready Plasma Television Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Haier Flat Panel Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

CoppellTVRepair.com

Level 3 Expert

749 Answers

Are you a Haier Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...