Question about BenQ 656A Internal 56x CD-ROM Drive

1 Answer

How to unblock freecell

Someone blocked the freecell on our computer when you try to get in it says access denied how do i get around that? ps in case you think it was a manager, it wasnt it was a creep in the building who thinks hes being smart, knowing that we dont know how to get in and undo it then he sits at his computer and plays we really want to get access back ourselves so that in the future the **** cant get away with it please e-mail me at lorimar_rah@hotmail.com thanks much hope you can help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 82 Answers

Most likely he has changed the permissions of the executable file for freecell.

Go to the following location in your pc

C:/Program Files/Games

right click on freecell.exe

Click on the security tab and uncheck the deny fields for every user group.

Click Apply

Click OK

then try to open freecell

Posted on Feb 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Internet connection problems.


In this case please check the ip address first
start - run type cmd hit ok and the black window type ipconfig
if you are getting ip address then its good
try to ping the websites by the command ping www.yahoo.com
check the details
then do a right click on my computer icon go to properties the hardware - device manager - under device manager look for network adaptors check which network adaptor you are using
then do a right click on that adaptors and click on uninstall wait until its gone from there
then do a right click on my computer and scan for hardware changes and wait
then try to access resources and let me know the status .
thanks

Mar 03, 2010 | E-Machines emachines (emachinees) CD-ROM...

1 Answer

How do i get rid of the KERNEL_STACK_INPAGE_ERROR on my d600? Occasionally it says UNMOUNTABLE_BOOT_VOLUME instead. Help?


This issue can occur if a requested page of kernel data could not be read from the paging file into memory, or the master boot record is infected with a virus. To further determine the possible cause, you must properly interpret the error message. If both the first and third parameters are zero, then the four parameters are defined as:
  1. 0 (zero)
  2. Page Table Entry (PTE) value at time of error
  3. 0 (zero)
  4. Address of signature on kernel stack
If either the first or the third parameter is not a zero, then the following definitions apply:
  1. Status code
  2. I/O status code
  3. Page file number
  4. Offset into page file
If this is the case, the cause of this issue may be determined from the second parameter (the I/O status code) by using the following information that is listed in a "value of second parameter" followed by "general cause" format:

0xC000000E, or STATUS_NO_SUCH_DEVICE: the drive went unavailable, possibly a bad hard drive, disk array, and/or controller card.

0xC000009A, or STATUS_INSUFFICIENT_RESOURCES: lack of nonpaged pool resources.

0xC000009C, or STATUS_DEVICE_DATA_ERROR: bad blocks on the hard disk.

0xC000009D, or STATUS_DEVICE_NOT_CONNECTED: bad cabling, non-termination, or the controller is not able to obtain access to the hard disk.

0xC000016A, or STATUS_DISK_OPERATION_FAILED: bad blocks on the hard disk.

0xC0000185, or STATUS_IO_DEVICE_ERROR: improper termination or defective cabling of SCSI-based devices, or two devices attempting to use the same IRQ.








To resolve this issue, use the appropriate method:
Boot sector virus loadTOCNode(2, 'resolution'); To determine if you have a boot sector virus, run a current virus-checking program, and if needed, disinfect your computer.
Not a boot sector virus loadTOCNode(2, 'resolution'); View the System Log in Event Viewer for additional error messages that help you determine the device that is causing the error.

Bad block. Stop 0x77 is caused by a bad block in a paging file, or a disk controller error, or in extremely rare cases it is caused when non-paged pool resources are unavailable.

If the first and second parameters are 0, then the stack signature was not found in the kernel stack. The cause of this issue is defective hardware. If the I/O status is C0000185 and the paging file is on a SCSI-based hard disk, you should verify the disk cabling and SCSI termination.

If the I/O status code is 0xC000009C or 0xC000016A, this normally indicates that the data could not be read from the disk due to a bad block.

If you can restart your computer after the error message, Autochk runs automatically and tries to map out the bad sector. If for some reason Autochk does not scan the hard disk for errors, manually start the disk scanner. If your computer is formatted with the NTFS file system, run Chkdsk /f /r on the system partition. You must restart your computer before the disk scan begins. If you cannot start your computer due to this issue, use the Command Console and run Chkdsk /r.

Defective or unreliable random access memory (RAM) is another common cause of this issue.

Verify that all the adapter cards in your computer are properly seated.

Ensure that all adapter card contacts are clean.

Disable system caching in the BIOS to see if this resolves the error.

If this does not resolve the issue, your computer mainboard may be damaged.

Oct 23, 2009 | Dell Inspiron 1150 Latitude D600 14.1 LCD...

2 Answers

Facebook is bloked on my computer how do i unblock it


You must have Facebook unbloke it.

Send them a e-mail - tell them you are sorry for all transgressions and you will not do it again. They may unbloke you.

Sep 21, 2009 | Dell Inspiron 8200 Latitude C840 Laptop...

2 Answers

I am the administrator!why is access denied


Try right mouse clicking on the software you are trying to use & select run as administrator. This works for me. Hope this helps.

Mar 11, 2009 | E-Machines emachines (emachinees) CD-ROM...

1 Answer

My Acer Laptop doesn't recognize my CD drive


It depends on a model. Somtimes you've to open all laptop but usually on a new laptops you have to unscrew only one screw. I suggest you to google, how to replace cd/dvd drive on your exact model. Maybe your drive is ok try to disconnect and recconect it. I had the similar problem with Toshiba Satellite A30 and it was anly connection problem.
Good luck!

Feb 20, 2009 | Acer (91.49C37.001) CD-ROM Drive

1 Answer

SGI O2 CD-ROM drive tray repeatedly opens


I am having the same problem. I haven't resolved it entirely, but at least I managed to get it working again by the following steps.

First, disassemble the part of the computer chassis around the CD-ROM drive. Follow the instructions for "replacing the CD-ROM drive" in the SGI 02 hardware maintenance manual. It can be done in 10 minutes with a screwdriver.

After you have gained access to the CD-ROM drive itself, take off the top metal cover. Then you will be able to see the tray and the white gears underneath.

In my case, the problem seems to be caused by some misalignment between some wire springs and the white gears. Note when the CD tray closes, the manual eject button (a black plastic rod on the right) should stick out, and the white piece of plastic with a triangular end on the left should push against the front of the CD tray.

Somehow, the gears failed to push the white plastic piece all the way to the edge of the tray, and the CD-ROM drive thinks the tray wasn't fully-closed, and ejects the disc.

To force the drive to read the disc, pull the white plastic piece on the left with the triangular end towards the edge of the tray. (Pull it towards you if you are facing the front of the drive.) You might need to use some force, but I can get the drive to work this way, even though it still "sticks open" half the time.

Good luck, and if you happen to find a better solution, I look forward to hearing it.

Jan 07, 2009 | SGI Silicon Graphics (P-CDR32-EXT) CD-ROM...

1 Answer

Dcom entry


Here try this link, I don't know if it will help or not. Worth a shot.

http://www.registryfix.com/?hop=account9

You want to download the one on the right side (registry fix?)
This one (below) is the link to that site. It may have some vital info or something that you need. I've never heard of such a thing before.

http://www.velocityreviews.com/forums/t103476-access-denied-attempting-to-launch-a-dcom-server-the-server-is-000c101c00000000c000000000000046-the-user-is-aspnetservername-sids1521160698084860216235818016745311007.html

Mar 10, 2008 | Toshiba Satellite A1O A15 A20 A25 A30 A35...

1 Answer

Cd error messages


Try to check if the file you want to copy currently used by the other application. You can check you task manager by pressing together the CTRL+ALT+DEL button.

Nov 02, 2007 | CD Drives

4 Answers

The screen goes blank at start up


If you can not see anything, then it may be your inverter (Replacement part cost is around $50.00), if you can see a dark image then your CCFL (Cold Cathode Fluorescent Lamp) is out. (Replacement part cost is around $15.00)

Check websites like http://www.ccfldirect.com/

Oct 16, 2007 | HP Pavilion zd7000 zx5000 zv5000 presario...

Not finding what you are looking for?
BenQ 656A Internal 56x CD-ROM Drive Logo

Related Topics:

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top BenQ CD Drives Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a BenQ CD Drive Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...