Question about Philips 60PP9202 60" Rear Projection HDTV-Ready Television

1 Answer

Phillips 60 in rear projection-- The convergence is off everytime I lose power?

Everytime I lose power at the house the convergence is lost on the set and I have to redo the settings. Anyone know how to prevent this? Could there be a battery inside that has gone bad? Any help would be appreciated!

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 230 Answers

OK, friends. Time to fix it !!. Replace two Ic's Stk 392-110, and get in service menu settings , and adjust point by point. After replaced stk IC's, check if any resistor look brown or born, if yes, replaced it with 6.8 Ohms.SOme time SSB is defective ( small signal board, replaced it ) If you have questions? noetvs@embarqmail.com . Good Luck !!

Posted on Jul 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power comes on but it is getting no picture.


Its a older set from the model number----do you get sound or on screen display like the menu or nothing at all? Were you having any issues where convergence during the first few minutes would jump in and out?

Aug 27, 2012 | Philips 60P8342 60" Rear Projection...

1 Answer

Several years ago we purchased a Philips 60" Rear


Hi,
It seems problem with convergence output section of tv and convergence output ICs need to be replaced by professional because it requires soldering work with proper tools.
Please call local tv repair shop to get tv repaired.
Thanks.

Jan 18, 2011 | Philips 60PP9202 60" Rear Projection...

2 Answers

The color on my Phillips 60 rear projection big


that means that the phone needs to be unlock by the network provider

Mar 13, 2010 | Philips 60PP9202 60" Rear Projection...

1 Answer

I have a phillips 60" rear proj. the converge will not adjust what is the secret repair and what does it take to change and replace coolant on picture tubes


You can get the convergence repair kit which contains full instructions on Cd and you can also get the Phillips CRT coolant Kit with instructions at www.tvrepairworld.com Free shipping within the US

Nov 28, 2009 | Philips 60PP9352 60" Rear Projection...

1 Answer

I have a phillips 60 inch hd rear projection television model number 60pw9363, i have recently replaced both convergence and the tv was working perfect for about 6 months, i went to turn on the set and a...


Whining noise sounds like the power supply in the TV ... not putting out the voltage it needs to project the image.... might have to consult with your TV repair

Sep 18, 2009 | Philips 60PW9363 60" Rear Projection...

1 Answer

60" Phillips rear projector television has red, blue, yellow


you have a convergance problem with your set. How much it cost to fix dont know what area you live in so cant tell you. Could be around 300 to 400 dollars. That is in a shop or someone comeing out to your house to fix.

Mar 03, 2009 | Philips 9P6040C 60" Rear Projection...

1 Answer

Problem with phillips 60 projection tv


Possible cause could be a defective HVG (5904). Replace part with part number listed in this service manual.
Possible cause could be a defective Convergence
Amps (7044 and 7045) on Small Signal Module.
Replace part with part number listed in service manual.

Jul 29, 2008 | Philips 60PP9202 60" Rear Projection...

1 Answer

QUestion.


Replace Convergence Ic's or convergence amp panel

Jan 05, 2008 | Samsung HCN529W 52" Rear Projection...

2 Answers

JVC convergencehas to be adjusted everytime the TV is turned on


You will need to enter servicer mode to do the alignment then
save changes.....info is in service manual........
Does your set have an auto-focus selection ? Try that first...T.

Dec 26, 2007 | JVC AV-48WP30 48" Rear Projection...

Not finding what you are looking for?
Philips 60PP9202 60" Rear Projection HDTV-Ready Television Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

71088 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...