a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The 1201 error message could indicate a serious hardware failure. Try to power the printer off > remove all cables from the back of the printer > re-insert the power cord > switch the printer back on and check if the error re-appears on the printer display screen. Should the error persist, please contact Lexmark Technical Support Center for additional assistance.
Error 1201; Carrier stall; Printer stopped
The definition corresponding to this error message is this: "The print carrier stopped before all of the data was used." To resolve this issue, please do the following:
Power the printer off.
Remove all cables from the back of the printer.
Reinsert the power cord.
Switch the printer back on.
Check the operator panel to see if the 1201 error message is displayed.
If the error message returns, the printer could be defective. Contact Lexmark Customer Support for further troubleshooting and warranty options.
- Power the printer off. - Remove all cables from the back of the printer. - Reinsert the power cord. - Switch the printer back on. - Check the operator panel to see if the 1201 error message is displayed.If the error message returns, the printer could
be defective. Contact Lexmark Customer Support for further
troubleshooting and warranty options.
Error 1203 is an issue that occurs either when a cartridge is bad or the printer cartridge Slot is bad...
1 - try cleaning the copper contacts of the both carts and cart slot in the printer and try again.. or 2 - when error shows up, shut the printers power off; wait one minute and turn it back on press copy.
and then click on support ,once the page is opened please center X4270 in
Search by Model ,after that choose Lexmark X4270 ,after seconds a page will open and then in
Search the KnowledgeBasePut this number and follow the steps given: