Question about Kenwood KDC-X590 CD Player

1 Answer

Kenwood cd player kdc4060ra

My display has stopped lighting up.? help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 132 Answers

SYMPTOM: No Display.
COUNTERMEASURE: Re-solder the following components on PCB X34-415:
R43, R44, R46, R47, R48, R49, R50, R51, R55, and R57.

Ok so if you remove the top of the unit and cd player down the right side you see a line of surface resistors that say 2R7 on them, they all need to be resolders to the bord theres 9 total.

Posted on Jul 25, 2008

  • Gregory Heald May 09, 2011

    You would think they would do this at the time the circuit board was made. Now the customer is soldering the Resistors. What's Next?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kdc-mp


put a cd cleaner in your cd player see if that helps.

Feb 16, 2014 | Kenwood KDC-MP435U CD Player

1 Answer

LCD display doesn't light up


Hi there,
Check my Tip, to see if this is the possible cause of your faulty display.

How to repair No Display on Kenwood faceplate


Cheers,

Mar 12, 2013 | Kenwood KDC-119 CD Player

1 Answer

Kenwood in dash cd player is blurry


Hi there,

Sometimes, car owners inadvertently clean the displays with harsh chemicals, which can react with the facia plastic.

The only method I can think of in this case, would be to try a light abrasive plastic polish such as Meguiar's Plastix or similar.

These creams are designed to remove light scratches on plastics (such as headlight lenses etc), but in your case, we are trying to polish the display back to a satisfactory optical finish.

Good luck.

Jan 07, 2013 | Kenwood KDC-MP205 CD Player

1 Answer

What cause the display to go out on the kenwood kdc-235 cd player


Hi there,

You could try reading my tip on repairing Kenwood faceplates.

How to repair Kenwood Faceplate


Cheers,

Jan 02, 2013 | Kenwood KDC-MP235 CD Player

1 Answer

Cd will not play displays E4


Page 22 displays error code descriptions and suggested remedies for your Kenwood KDC-122 CD Player. This is a link to Kenwood site and instruction manual.
http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KDC2022.pdf
Yes, the KDC-122 is included in this document.

Oct 26, 2009 | Kenwood KDC-122 CD Player

1 Answer

KDC 3008 display unit faded


if the screen went black, it means your lcd lights wnet bad, there is no light power button on those, they automaticaly work....

Nov 25, 2008 | Kenwood KDC-135 CD Player

1 Answer

Kenwood KDC-W5534U Display stops working any help would be appreciated


I have the same problem, and i will find a solution!
when i have it i let you know
grtz

Jul 18, 2008 | Kenwood KDC-W5534U CD Player

1 Answer

Display is OUT but everything functions....... what to do?


SYMPTOM: No Display.
COUNTERMEASURE: Re-solder the following components on PCB X34-415:
R43, R44, R46, R47, R48, R49, R50, R51, R55, and R57.

Ok so if you remove the top of the unit and cd player down the right side you see a line of surface resistors that say 2R7 on them, they all need to be resolders to the bord theres 9 total.

Jul 13, 2008 | Kenwood KDC-X590 CD Player

1 Answer

Kenwood head unit CD and AUX sound not working


I fixed the sound problem with tech support from Kenwood. I had the blue wire from the Kenwood which is the antennae turn on wired to the amp turn on for the vehicle (2001 Blazer with Bose factory stereo). This is how I was told to wire it from the installation tech where I purchased the wiring harness. The tuning played fine because the Bose amp turned on when I played the tuner but when I played the cd or aux the amp turned off, thus no sound. The kenwood tech toldd me to wire the blue/white wire to the amp turn on for the vehicle so the amp would be on when ever power to the Kenwood was on. I rewired this way and everything works great now.

Jun 09, 2008 | Kenwood KDC -X815

Not finding what you are looking for?
Kenwood KDC-X590 CD Player Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...