Question about Philips 50PF9956 50 in. HD-Ready Plasma Television

1 Answer

No picture no sound click ok goes off

I push power blue light goes on for 5 seconds then it automatically turns off I have the same exact problem. There were no prior issue and the TV worked perfect up until that moment

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

Can you tell use the patter in which the light blinks??

it will help us to decode the problem easily

Posted on Jul 14, 2008

  • dewan nafees ahmed Jul 14, 2008

    if you hear any kind of click noise in the unit then it means some bad component in the power board.

    and the repay trips every time there is a problem shooting up.

    so make sure all components are all right in the power board before proceeding to any other components inside the unit.


  • dewan nafees ahmed Jul 14, 2008

    thank you

    have a great day

    good luck


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG47LH3000 no power to the screen


Check its back-light inverter board for any shorted component/s. Repalce it. There is no repair to it. Chekc and locate the exact faulty board, by disconnecting the power cable that goes to each board.
If you wish to get some details, check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/
http://electronicshelponline.blogspot.com/

Dec 13, 2013 | Televison & Video

1 Answer

I am currently working on a Sharp Lc37sb24u. I was originally thinking it had a bad inverter board but now I am not so sure. When I turn the tv on the picture comes up with audio for about 2 seconds the...


Did you check the service manual troubleshooting guide yet. You can try disconnecting the power to the inverter board and see if it will stay on and have sound.
Service manuals:
http://elektrotanya.com/?q=showresult&what=Sharp%20LC37SB24U&kategoria=&kat2=all

Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.

Oct 27, 2011 | Sharp LC37SB24U 37 in. LCD TV

1 Answer

I have a sony tv model kdf-50e2000,and it has a problem with the picture going blank,the only light that on or flashes is the green (POWER) light. when turning the set on the green light blinks as it...


You tv used lamp XL-2400 or also known as F93087500. It is very common for this bulb to fail and have the exact symptom you are experiencing. I cant count how many times I have seen it.. Replace the lamp with either the exact Sony or an OEM and you will be back in business..
Good Luck!!

Dec 28, 2010 | Sony KDF-50E2000 50" HDTV

1 Answer

I have a '96 samsung 25" tube tv. model # TXE2546 - series # 3CAG700429. when i turn it on it has always made a click sound a couple of seconds afterwards. the "power & timer" led light flashes about...


This problems the FBT-the Flyback Transformer have cold solders.Must resolders the FBT.The right side wall of the FBT-the "H" horizontal transistor,must be also resolder too.










































































































































































































































































































































































































































































































































































































































































Oct 18, 2010 | Samsung TXJ2754 27" TV

1 Answer

ICs + resistors swapped= blue power light auto on clicking noise


Unplug the power to the convergence board. If it turns on, you still have a problem in the convergence circuit.

Dec 16, 2009 | JVC AV-56P575 56" Rear Projection...

2 Answers

Picture & sound go on & off every sec, red light blinks 5 times


helloFive blinks - AKB circuit (automatic kine bias), the timer/standby indicator blinks for about 30 seconds then goes to the self-diagnosis function. Something is wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen slightly.

shaun

Oct 25, 2009 | Sony Grand WEGA KDF-55XS955 55" Rear...

1 Answer

My tv won"t turn on.


1. Hold [menu] and [vol-] button on the side of the TV
2. while holding these, press the [power] button on the side of TV (NOT remote)
3. blue light comes ON and stays ON
4. wait 10 seconds then let go of [menu] and [vol-]
5. wait another 30 seconds and some type of picture should appear

I think this is right. I got it from the JVC call centers guys so sorry if I missed or messed up a step.

Apr 07, 2009 | JVC LT-42X579 42 in. LCD TV

1 Answer

I replaced the burnt out lamp,not working !!!


This may sound crazy. If you still have the old lamp. Put new lamp in old housing, and try that.

Mar 18, 2008 | Hitachi 50V500 50 in. HD-Ready LCD...

Not finding what you are looking for?
Philips 50PF9956 50 in. HD-Ready Plasma Television Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

70983 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...