Question about HP LaserJet 8150dn Printer

2 Answers

Hp-8100 50.1 fuser error (James Cho)

I have 50.1 fuser error after warm-up.
I'd like to change a part to fix it by myself.
Can you give me a solution for that?
Thanks in advance

.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 34 Answers

And if that does not fix your problem, you may BE SURE that it is the low voltage power supply. Your chances are 25% fuser and 75% that it is low voltagepower supply.

Posted on Mar 17, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

The fuser. Located in the back. No tools required.

Posted on Feb 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

HP Laserjet 3000n has 50.2 error fuser warning on screen. What exactly is the issue? How can I fix the issue?


most probably fuser side problem, if you have extra fuser for isolation the better.

May 11, 2011 | Printers & Copiers

2 Answers

I have a printer laserjet p4014n that is give an error "50.2 fuser error". i have already changed the fuser kit but problem persists. i took another fuser and fixed it in the old kit but the...


If you replaced the heating element in the old fusor, which is what I understand this to mean, then there's either a problem in the fusor assembly itself, or there's a problem in the low voltage power supply.
It may just be a fuse in the LV supply.
If you have access to a whole LV board, replace it and see if that solves the issue, and then if it does, start checking the components on the defective board (this will be made easier since you have a reference of what the readings should be on the working board)

Mar 10, 2011 | Printers & Copiers

3 Answers

I have an error code 50.2 it says i need to remove the fuser ,, where is the fuser located


http://www.feedroller.com/Store/Service%20Manual/LaserJet%204345%20MFP%20sm.pdf

This a link to a 4345 service manual. Fuser is in removal and replacement/user replaceable parts. A 50.2 is the fuser is not warming up to temp. A replacement may ne needed. If the fuser was just replaced you would want to check this pdf
www.lbrty.com/tech/ta4xxx.pdf

Jul 06, 2009 | HP Printers & Copiers

1 Answer

Changed power supply from 110v to 220v, now get 50.2 fuser error


The printer will have a 120v fuser, unkess that has been changed for a 220v fuser, it won't get up to temprature on 220v, hence the error message.

It needs a 220v fuser.

May 05, 2009 | HP Hewlett Packard LaserJet 2605dn Printer

3 Answers

Error 58.04


This is from the service manual and should help you determine if you need to call in for service. If is in warranty I would anyways since the fuser would be covered if at fault.

58.04 ERROR To continue turn off then on. The low-voltage power supply has experienced an error.
1. Reinstall the fuser. Check the connector
(J1901) between the fuser and product.
Replace the cable or fixing unit if the
connector is damaged.
2. Reconnect the connectors of the fuser
control PCA (J303, J305) and the DC
controller PCA (J107).
3. Replace the fuser. See Fuser
on page 191.

May 03, 2009 | HP LaserJet 5200tn Printer

1 Answer

HP Laserjet 3550 Fuser Jam Error 13.20 Had it in


You need to ask them to change the fuser..The fuser is the part of the printer that actually melts the toner onto the page. Here is a website that gives you more info on the fuser so they can't B.S. you anymore..either the fuser works or it doesn't..

http://www.theofficeguide.com/toner-cartridges/faq2.html

Please rate this solution thanks.

Mar 25, 2009 | HP Color Laserjet 3550 Printer

1 Answer

Fuser 50.1 error on HP 3500 printer


From HP Website:
50.X FUSER ERROR Description A fuser error has occurred. Action
  1. Turn the printer off.
  2. Verify the fuser is properly installed and fully seated.
  3. Turn on the printer.
  4. If the message persists, contact HP Support.

Mar 23, 2009 | HP Color LaserJet 3500 Printer

1 Answer

Engine fuser error


You need to service the Printer fuser unit,
if this is an intermittem error,
this will fix,
must be a loose connection in the fuser

Nov 27, 2008 | HP LaserJet 1320 Printer

4 Answers

Hp 4350 error code 50.3


I have just changed the fuser unit and the printer is still giving the
same error [fuser error and low heating] Kindly help.

Maxwell Mpundu@technet.co.zm

Apr 21, 2008 | HP LaserJet 4350 Printer

Not finding what you are looking for?
HP LaserJet 8150dn Printer Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96396 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...