My blackberry 8220 keeps restarting and the red LED is blinking, the screen though keeps showing the loading icon, but never loads.

Hello,

To perform a hard reset ON your blackberry 8220, follow the steps below:

On the Home screen, click the Options icon.

Click Security Options.

Click General Settings.

Press the Menu key.

Click Wipe Handheld.

Regards

well, if it is anything like the 8300-

on the home screen, look around for an icon that looks like an antenna on a tripod. If you don't see it hit the berry button and click "show all"

once you find the icon and click on it, you'll see the bluetooth box- check it and the status will change from the red x, to yellow, then green once it's up and running thank you,hope this helps

If you want to do it yourself, here is a Blackberry Repair Guide that shows how. I don't think they have an exact guide for this model, but the repair process is very similar.

Did you upload some different type of software.
Format your device

Screen option>security option>general settings>(press the menu button) wipe handheld>type “blackberry”

Best Regards & Thanks
Akhtar Mohammad Kalim

well, if it is anything like the 8300-

on the home screen, look around for an icon that looks like an antenna on a tripod. If you don't see it hit the berry button and click "show all"

once you find the icon and click on it, you'll see the bluetooth box- check it and the status will change from the red x, to yellow, then green once it's up and running

LED indicator keeps on blinking (red light) but no screen its water dep i rehot the phone 100%ok done

cant say this enough www.crackberry.com this sight is a must have for any blackberry user

my BB 8220 flip went off a couple nights a go and it wont turn on when i try to turn it on the loading screen comes on and then off in some seconds and the red light comes on and then off also ....................can you help me

On the menu screen, you go to the speaker icon (Profiles) and click on it. From there you will click on Advanced. It should have your current ring selection highlighted already. You will then click the menu button click on Show Ringtones and choose the ring tone you want to use. Hope this helps!

I own a Blackberry 8120. Have you tried a hard reset by pulling the battery and then restarting the phone? Also, events get caught in the phones memory process as well, causing reminder LED's to not clear after clearing the event. Go to options>security options>memory cleaning and enable the memory cleaning function. Set the icon setting to show on the home screen, memory cleaning is a function that many blackberry users under-utilize...the memory must be cleared just like a desktop PC, the rapid logging of events causes some to hang up. I believe one of these 2 solutions will help you out.