Question about Electrical Supplies
I was recently given a Black and Decker Relfex GL340 trimmer. The line has run out, so I've bought some more line, but can't work out how to fix it in, as I don't have any instructions! Heeeeeelp please.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I use a dremel with a sharpening stone, if u don't have one you can also use a power drill with a small sanding disk (1 inch) and course sand paper (30 or 40 grit). or you can use a bastard file. its too tight to use any kind of angle guide so just take your time and do it by eye. it shouldn't take much to get them sharp enough to do the job, over-sharpening is unnecessary and dangerous, and will make the blades dull faster. sharpen all the free blades, top and bottom, then start the trimmers to advance the blades to free up the sides you couldn't get. i use a light penetrating oil to clean the blades first, then lithium grease spray to lubricate.
Posted on Nov 28, 2008
Replace the spark plug, clean the air filter and fill the tank with new fuel at the correct fuel oil ratio. Had the same problem last year. Tried to cheat with year old gas.
Posted on May 10, 2009
Tips for a great answer:
Aug 28, 2014 | Black & Decker Black and Decker & Grass...
Sep 08, 2011 | Black & Decker 14" Grass Hog Xp...
Oct 14, 2009 | Black & Decker 14" Grass Hog Xp...
Oct 09, 2009 | Black & Decker String Trimmer Cordless 12"...
Jul 27, 2008 | Black & Decker String Trimmer Cordless 12"...
874 people viewed this question
Usually answered in minutes!