Question about Televison & Video

3 Answers

I have a rca-f36650 it just stoped working & the power button flashs on & off

Posted by on

  • striper1 Jul 14, 2008

    it flashes 3 times

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

Can you provide the chassis number?
Chances are the protection circuit has activated. This is caused by a short circuit in some part of the 8 or 10 sections of the tv circuitry. The diagnosis involves checkign each area until the culprit can be found, so the troublshooting labor can be high and the replacement of vital parts can be expensive. Typically with RCA the problems center around the high voltage section or the main power supply areas. These repairs are in the neighborhood of $200 to $300.

Let me know if you need further assistance.

Posted on Jul 14, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 1,894 Answers

Can you please mention the number of flashes it makes??

that would be helpful in determining the problem exactly

Posted on Jul 14, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,847 Answers

Seems issue with the bulb.

Posted on Jul 14, 2008

  • Legin Varghese
    Legin Varghese Jul 14, 2008

    Unfortunately it might be the convergence board IC's that failed. (color alignment controller) This isn't a DIY project, usually cost around $300 a failed IC. You might at least have a technician diagnose it for sure. Then you'll know whether to invest or save up for something new.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2 remotes to my RCA LED52B45RQ tv. both are RCA remotes and we are having the same problem with both... they randomly stop working (nothing works). power button lights but nothing happens.


You may have a stuck button and not know it. look at the led end of the remote with the camera on your cell phone. If you have a stuck button you will see the led flashing. If it isn't flashing. push a button to see the led flash. Keep pushing different buttons to see if the led will flash without holding a button down. If you push a button and the led doesn't flash, it can be worn carbon button or the ic in the remote is failing If this test procedure does not find why the remotes die. you may want to invest in a a remote that will never become obsolete or worry about codes to operate more devices. It's called a Harmony remote. It's awesome. Logitech Harmony universal home theater remote and app

Sep 13, 2016 | RCA Televison & Video

1 Answer

RCA rear projection 61


why did you take apart the lenses did you take other parts a loose. may you unpluged a conniction or you need to back trace what you did if it was working before you did it. did you open the tubes

May 28, 2012 | RCA D61W20 61" Rear Projection Television

1 Answer

I have a 62" rca led hdtv.. when I push the power


How many times does the light flash each time? Also whats the full model number of your set?

May 30, 2011 | RCA Televison & Video

1 Answer

My RCA HDTV D52W23 Will not Turn On!!


Trying installing a new power supply. This is the main problem with tv's with the issue. But if you just bought it I would try to get my money back from where I bought it from. Installing a power supply for a tv is not that hard at all.

Sep 03, 2009 | RCA D52W23 52" HDTV CRT TV

1 Answer

Tv junk


You have 3 capacitors that open up on deflection board cp150 2200uf 16v if it is bubbled up on top it is bad replace all 3 caps cp150,111,114.

Sep 12, 2008 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

Timer light is flashing but tv wont turn on!


When the timer light stoped flashing the remote control would not turn on the TV. The next time the light quit flashing I held the power button in on the TV for about 5 seconds and it came on and has had no problems since then with the remote or the local TV power button.

Greg Allen

Aug 29, 2008 | Mitsubishi Televison & Video

1 Answer

Will not turn on at all


When you pres the power button does the power light blink? or does the light not come on? Please respond to this same post when replying and I will try to assist you.

Jul 17, 2008 | RCA D52W19 52" Rear Projection Television

2 Answers

RCA TV Will Not Power On - Powered Off Suddenly


Theses sets had 2 problems pip mod or most of the time Flyback Transfomer bad.

Jul 13, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

1 Answer

RCA TV Will Not Power On - Powered Off Suddenly


I have the same problem. Just Monday it started, Green light blinks but nothing comes on. Any suggestions?

May 31, 2008 | RCA HD52W59 HDTV Projection Television

1 Answer

RCA 36" model f36650


If you have your manual, the manual may have the error codes in them, otherwise you can search online for the error codes or post the model number here so that we can help you find the correct manual or list of codes, but yes the lights are an error code.

Let me know if you need any further help

Mar 28, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69745 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...