Can't print duplex on p2015d with pcl6 driver on windows 7 Only allows manual duplex with universal print driver pcl5 and pcl6

I would uninstall the printer. Then I would go to the Canon website and download the driver. Make sure you download the one for Win 7. Often when you upgrade, the system tries to use the old driver but as you found, it doesn't always work.

Sharp does not natively support or provide a PCL6 driver for this device. That being said, another possible workaround to provide you with a PCL6 driver for this is to try the HP Universal Print Driver for Windows PCL6 x64bit. This driver simply prints direct to the IP address that the printer uses on the network. You may sacrifice a few special features of the device using this driver, but I've had excellent success with it and recommend trying it.
Here's a link to the driver:
http://hp.driversdown.com/hp-drivers-download/HP-Universal-Print-Driver-for-Windows-PCL6-x64_18967.shtml
Hope this helps!

You didn't say what kind of printer you have.
Sounds like a driver problem.
Go to the manufacturers web site and download the latest drivers for your printer.
If you were using the PCL6 driver, try installing the PCL5 driver. If you were using the PCL5, try using the PCL6.

Not designed. Try this site for the drivers if available


Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

This could be a driver issue. Without knowing exactly how your printer is connected to the network I'm making a rough guess here.

There is a Universal HP Printer driver that could be tried as well as the PCL5, PCL6 and Post Script drivers.

I've had issues with the PCL6 drivers before doing this and I usually install the PCL5 drivers instead.

Your P2015D model has been around for awhile. Windows Vista is relatively new, therefore the installation CD may not have a driver for Vista. Try downloading a Vista driver from HP.com (free of charge). PCL6 is probably your best choice. Try the following link.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=1845555&taskId=135&prodTypeId=18972&prodSeriesId=1845551&submit.y=6&submit.x=9&lang=en&cc=us

Download the latest driver from HP => http://www.hp.com/#Support

It's version 4.7 released on November 25, 2008. I recommend downloading PCL6 as it supports 1200dpi. PCL5 only supports 600dpi. Windows Vista comes installed with PCL5.

The driver took a while to install about 4-5 minutes on Vista 32 bit Home Edition. I thought I hung as mentioned above. I left to do something else and came back and it was finished.

I was having trouble with the HP1200 not manual duplexing and printing one page only. The new driver fixed the issue.

Hello,

Please download and install the Universal Printing Driver - PS version from the followng site:

If the printer is connected via USB, select the Traditional Mode, if DHCP network, select Dynamic Mode.

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=1845551&prodNameId=1845555&swEnvOID=228&swLang=8&mode=2&taskId=135&swItem=ja-36004-15

as i know, usb-printers don't support both side printing. It is words of the generant

This is gona be a helpful website for you

http://search.lexmark.com/printer/US/en/13D0000