Question about Whirlpool GU2400XTP Built-in Dishwasher

1 Answer

Start light blinking

My Dishwasher workedd fine last night, today, I loaded it, shut the door and tried to turn it on. The start light keeps blinking, I hit cancel and it stopped, I tried to reset it by alternating the dry and sani rinse button, but that didnt work, usually it will send the dishwasher into test mode and fill up, but all the lights just stayed lit up. I canceled again and the lights went off. I cannot get it to work. The start button just keeps blinking and it wont cycle. I think I hear it laughing at me. HELP PLEASE!

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 725 Answers

Test mode is Heated dry - Normal - Heated dry - Normal in 6 sec....

does it blink slowly or three time or fast or 7 times then repeat... let me know and I can help

Posted on Sep 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Updated details: Normal cycle keeps blinking


Have u tried unplugging it for about 2m and plug it bk in that will master reset everything like u just bought it and see how that's works out

Sep 18, 2015 | Dishwashers

1 Answer

97 intrepid shut off fine last night, today will


sounds like a fuel pump or maybe check on the asd relay or fuel pump relay try taking them off and tap on them then try to start if no start sounds like a fuel pump or timing belt issue. good luck

Jan 05, 2010 | 1997 Dodge Intrepid

1 Answer

Kitchen Aid dishwasher will not start


Can not start KitchenAid dishwasher..."child lock" light keeps coming on. Help!

Aug 24, 2009 | KitchenAid Dishwashers

1 Answer

We lost electricity very briefly today which caused the dishwasher, washing, drying, clean buttons to blink when the electricity came back on. I opened the door to do a load of dishes hours after the...


it seems unit fill valve is stuck open and water is coming in even when machine is off.fill valve opens up only when u start the unit.2 chks this u can open the door and look at the hole inside from where water comes in.if water is coming in with dooe open then 4 sure valve is bad and needs 2 be replaced.

Aug 11, 2009 | Frigidaire 24 in. PLD2850 Built-in...

1 Answer

Kenmore Dishwasher 5871525 stops running after a few minutes


sounds like a stuck key pad since you said the normal wash button flashed.. the other thing is try holding the door shut while you run it.. to see of it is maybe not latching properly..

Apr 10, 2009 | Kenmore 15762 Dishwasher

1 Answer

DISHWASHER WON'T START,ALL LIGHTS ON PANEL FLASH RED


how to download the game gat4 (i don't know ENGlish )

Feb 15, 2009 | Kenmore 24 in. 17052 / 17054 / 17059...

3 Answers

"Clean light" keeps blinking; dishwasher won't start new cycle


Check to see how it's loaded. If something is obstructing either of the spray arms it will not start. I had this same problem and checked to see if there was something impeding the arms - I found there was. Reloaded the unit and it's running like a champ now!

Feb 07, 2008 | Frigidaire 24 in. GLD2150RCC Built-in...

1 Answer

Dishwasher won't start


Kaclf, If you have no lights at all, dishwasher unresponsive, it's probably one of two things. First check the junction box where the cord hooks up to the dishwasher. Sometimes I find a bad connection in the wire-nut. Second, there is a thermal fuse that sits on the control board. You will have to remove the inside panel. You want to see if it's blown. It will be sitting on the top side of the board, two wires going to it. Catriver

Dec 30, 2007 | Dishwashers

Not finding what you are looking for?
Whirlpool GU2400XTP Built-in Dishwasher Logo

770 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Mike

Level 3 Expert

4334 Answers

Owen Barnes

Level 3 Expert

867 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...