Manual for installation Canon printer ip 1200 pixma, I lost the CD

You can install this printer by downloading the printer software/driver from this link and then use that for installation, just click HERE and proceed with the download.

You can download the driver your your iP1200 from
http://software.canon-europe.com/products/0010321.asp
Specify your OS and language and download and install
Please rate this solution. Thanks.

hi there....
you can download the software for ur ip1200
http://software.canon-europe.com/products/0010321.asp
regards iversh

a very helpful rating is appreciatred for answering ur query....

http://software.canon-europe.com/products/0010321.asp

http://support-au.canon.com.au/EN/search?canonsearch=1&lang=EN&category=Printers&series=Colour+Bubble+Jet+Printers&model=PIXMA+iP1200&menu=Download

There u go!
Select your OS and download the drivers

Good luck
Nic

I don't have CD installer for canon printer MULTIPASS F150

Go here, select your model from the drop down menu and then on the next page, select your OS and install.
http://www.usa.canon.com/consumer/controller?act=DownloadIndexAct

go to

canon.com

select area you are from on map

under consumer services select product support

under catagory select printer

under type select pixma

under model select pixma ip4000

select tab for downloads& drivers

select you operating system

download file and follow directions


hope this helps

Hi - You can download the software from the link underlined in blue below:

iP 1200

Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

http://software.canon-europe.com/products/0010321.asp click on ths link select the driver for your os (xp or vistor) click down load box pops up click run /open and follow instructions