Question about Dishwashers

Open Question

Whirlpool ADP 6940 error code F2

I have lost my error code list and am trying to find one online. Can you help?

Posted by on

  • ken46ck1 Mar 08, 2009

    my whirlpool dishwasher ADP4731/5/s is displaying F2 on digital display

×

3 Suggested Answers

  • 82 Answers

SOURCE: error code f4 on my

Blocked waste outlet or maybe just a worn pump.
I fixed a new one today showing F4
I found a piece of broken glass stopping the waste pump.
Hope this helps
john

Posted on Aug 27, 2009

blueextc3221
  • 15935 Answers

SOURCE: Error code F4

The F4 error code on your washer indicates a problem in the electrical circuits of the washer... and not end-user repairable.
This problem requires a technician to test the wiring circuits to diagnose the problem.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 21, 2010

  • 1 Answer

SOURCE: i have an error code f4 on my whirlpool adp 8966

I had same error, I had put too much powder in and wrong stuff too, was really sudsy. Wouldnt completely empty. Fixed by starting and stopping machine until emptied. Hold down start/stop button for a few seconds to clear the f4 warning...

Posted on Aug 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the maytag series 4000 and got the f2 code. I have cleaned the.hoses and wven replaced the drain pump. Is thete a rest button? It is still not working and.shows the same code


F2 code is water level to high

Washer Error Codes
Below is a list of washer error codes for HE & conventional top load washers and front load washers. As more error codes are found or published, we will add to the list. Right now you will find error codes for Asko, Fisher & Paykel, Frigidaire, GE, Kenmore, LG, Maytag, Samsung, and Whirlpool. This list might not be complete and should be used for reference only.
Asko Washer Error Codes
• F1--Water supply/low water fill.
o 1. Check water supply to machine.
o 2. Replace water inlet valve.
• F2--Water level too high.
o 1. Plugged/Bad water pump.
o 2. Faulty water valve.

Sep 19, 2014 | Washing Machines

1 Answer

After cooking my whirlpool Electric Range started to beep and shows EO F2. The range top is working ( and range top controls ) but the oven won't shut off and the controls are not working for the oven.


Hello,

Here is what my online service manual for the F2-EO error code says


F2 - E0 Shorted keypad (also called touch pad) 1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock)


I hope this helps

Gene

Aug 01, 2011 | Whirlpool Kitchen Ranges

1 Answer

Start light flash 2 times on a Whirlpool ADP 6940.


Whirlpool dishwasher start light flashes 7 times repeatedly and wont start

May 24, 2011 | Whirlpool 24 in. ADP6940 Dishwasher

1 Answer

Code f7 appearing on whirlpool dishwasher adp 6940/5


f7 means a water flow meter problem. Either your dishwasher is not getting proper water pressure, or the flow meter is bad. Check to make sure you have good water pressure to the dishwasher, and then check that your water is coming in at a good flow rate. If both of these are ok, then replace the flow meter. If your house water pressure to the dishwasher is good, but your water flow coming into the dishwasher is slow, then your dishwasher water valve is probably plugged. Some valves you can take apart and clean out, and some you will need to replace. Good Luck, Appliance Specialists

Dec 08, 2010 | Whirlpool 24 in. ADP6940 Dishwasher

1 Answer

My whirlpool adp 4552 keeps on flashing 7 times...whats the problem?


This is not a solution, but a start. There should be a tech sheet somewhere with the dishwaser. Often it is stuck to the back of the kick plate. In this, or possibly in your owners manual, there should be a list of "error codes" This should explain what the seven flashes mean.
Good luck

Nov 17, 2010 | Whirlpool Dishwashers

3 Answers

My whirlpool oven is displaying E6 and F2. It


Your cancel key is defective at this point. follow these steps below?

1. Check keypad connector for firm connection (keypad connects to control board).
2. Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad in to control board as one unit. In this case, replace control board (also called ERC or clock).

Aug 08, 2009 | Whirlpool RBS305PDS Electric Single Oven

1 Answer

Error code F4


The F4 error code on your washer indicates a problem in the electrical circuits of the washer... and not end-user repairable.
This problem requires a technician to test the wiring circuits to diagnose the problem.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jul 04, 2009 | Whirlpool 24 in. ADP5966 Free-standing...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

yadayada
yadayada

Level 3 Expert

69199 Answers

Brad Brown

Level 3 Expert

15008 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...