Question about Samsung ML 1610 Laser Printer

1 Answer

Doest print properly

When i remove the cartridge out of printer and shake it well and then re-insert the printer, few pages gets printed properly, but after after pages, the print gets faded and looks as though the ink/powded got exhausted. But again if i remove and shake the cartridge and then re-insert it, few pages gets printed and the same problem gets repeated.I dont think that the ink/powder has run out.Pls advice

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

Is this a new catridge(initial cartridge), it has only the capacity to take 1000 pages only,
1. I think u r cartridge is become empty, this is why so it shown, for this u just contact the service centre for refilling the cartride,
2. or , for summer seasson the moisture is entering inside the cartridge, this is couse to toner powder damaging( for samsung tonor powder contain a particular electronic charge, the moisture is reducing this charging capacity), for this u just contact the service centre,for a cartridge cleaning

the authorised service centere at cochin,kaloor. their contact no is 0484-2347563 or 9947771551, contact mrs.sanil augestine




regards harikanth
harikanth50@rediffmail.com

Posted on Jul 14, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon 4450 toner low


When the toner cartridge is exhausted or empty then theprinter will not be able to print further documents or the prints will be veryfaint.You may be able to print a few more pages by removing the tonercartridge and shaking the toner cartridge in a horizontal position a few timesand then placing it back into the printer.This will give you an opportunity to print a few more pages and giveyou time to purchase a new toner cartridge for your printer. A cheaperalternative is to purchase a re-manufactured toner cartridge for your modelprinter.A re-manufactured printer cartridge also replaces worn partsas well as refilling with toner powder.

Mar 09, 2012 | Canon MF4450 AllInOne Laser Printer

1 Answer

Get more out of toner when low


When the toner cartridge is exhausted or empty then theprinter will not be able to print further documents or the prints will be veryfaint.You may be able to print a few more pages by removing thetoner cartridge and shaking the toner cartridge in a horizontal position a fewtimes and then placing it back into the printer.This will give you an opportunity to print a few more pages and giveyou time to purchase a new toner cartridge for your printer. A cheaperalternative is to purchase a re-manufactured toner cartridge for your modelprinter.A re-manufactured printer cartridge alsoreplaces worn parts as well as refilling with toner powder.

Jan 22, 2012 | Brother MFC-8480DN All-In-One Laser...

1 Answer

Get more ink from 8480 toner cartridge


When the toner cartridge is exhausted or empty then theprinter will not be able to print further documents or the prints will be veryfaint.You may be able to print a few more pages by removing thetoner cartridge and shaking the toner cartridge in a horizontal position a fewtimes and then placing it back into the printer.This will give you an opportunity to print a few more pages and giveyou time to purchase a new toner cartridge for your printer. A cheaperalternative is to purchase a re-manufactured toner cartridge for your modelprinter.A re-manufactured printer cartridge alsoreplaces worn parts as well as refilling with toner powder.

Jan 22, 2012 | Brother MFC-8480DN All-In-One Laser...

1 Answer

IN canon ir2525 out of toner is showing


When the toner cartridge is exhausted or empty then theprinter will not be able to print further documents or the prints will be veryfaint.You may be able to print a few more pages by removing thetoner cartridge and shaking the toner cartridge in a horizontal position a fewtimes and then placing it back into the printer.This will give you an opportunity to print a few more pages and giveyou time to purchase a new toner cartridge for your printer. A cheaperalternative is to purchase a re-manufactured toner cartridge for your modelprinter.A re-manufactured printer cartridge also replaces worn partsas well as refilling with toner powder.

Jan 13, 2012 | Canon Printers & Copiers

1 Answer

Laxmark e260dn laser printer printing blank page


When the toner cartridge is exhausted or empty then theprinter will not be able to print further documents or the prints will be veryfaint.You may be able to print a few more pages by removing thetoner cartridge and shaking the toner cartridge in a horizontal position a fewtimes and then placing it back into the printer.This will give you an opportunity to print a few more pages and giveyou time to purchase a new toner cartridge for your printer. A cheaperalternative is to purchase a re-manufactured toner cartridge for your modelprinter.A re-manufactured printer cartridge also replaces worn partsas well as refilling with toner powder.

Jan 05, 2012 | Lexmark Printers & Copiers

1 Answer

Problem in printing only white paper is coming out?


When the toner cartridge is exhausted or empty then theprinter will not be able to print further documents or the prints will be veryfaint. You may be able to print a few more pages by removing thetoner cartridge and shaking the toner cartridge in a horizontal position a fewtimes and then placing it back into the printer. This will give you an opportunity to print a few more pages and giveyou time to purchase a new toner cartridge for your printer. A cheaperalternative is to purchase a re-manufactured toner cartridge for your modelprinter. A re-manufactured printer cartridge also replaces worn partsas well as refilling with toner powder.

Aug 11, 2011 | HP LaserJet P2015dn Printer

1 Answer

Samsung sx4300 printer toner exuted problem


When the toner cartridge is exhausted or empty then theprinter will not be able to print further documents or the prints will be veryfaint. You may be able to print a few more pages by removing thetoner cartridge and shaking the toner cartridge in a horizontal position a fewtimes and then placing it back into the printer. This will give you an opportunity to print a few more pages and giveyou time to purchase a new toner cartridge for your printer. A cheaperalternative is to purchase a re-manufactured toner cartridge for your modelprinter. A re-manufactured printer cartridge also replaces worn partsas well as refilling with toner powder.

May 07, 2011 | Printers & Copiers

1 Answer

New Dell 1710 laser printer is generating faded characters


This usually happens when the toner is running low.
Try removing the toner cartridge and shake it in a horizontal position and insert it back in the printer. This may give you a few more printed pages before you have to get a new toner cartridge.

Feb 09, 2011 | Dell 1700n Laser Printer

3 Answers

What is the replacement printer for HP Laser Jet


This document provides information about replacing the print cartridge for the HP LaserJet 1010 printer series, including life expectancy and replacement instructions. Print cartridge life expectancy The life of the print cartridge depends on the amount of toner that your print jobs require. When printing text on letter/A4-size paper at five percent coverage, the print cartridge lasts an average of 2,000 pages. This assumes that you set the print density to three and disable EconoMode. (These are the default settings.) See Ordering supplies for information on ordering replacement print cartridges. Changing the print cartridge Follow the below instructions to change the print cartridge:
  1. Open the print cartridge door, and remove the old print cartridge. See the recycling information inside the print cartridge box. Figure 1: Removing old print cartridge c00028312.gif CAUTION: To prevent damage, do not expose the print cartridge to light. Cover it with a piece of paper.
  2. Remove the new print cartridge from the packaging, and gently shake it from side to side to distribute the toner evenly inside the cartridge. Figure 2: Gently shaking new print cartridge c00028313.gif
  3. Pull the tab until all the tape is removed from the print cartridge. Put the tab in the print cartridge box to return for recycling. Figure 3: Removing tape from print cartridge c00035442.gif
  4. Insert the print cartridge in the printer, making sure that the print cartridge is in position. Close the print cartridge door. Figure 4: Inserting new print cartridge c00028315.gif

Apr 20, 2010 | HP LaserJet 1010 Printer

1 Answer

Uneven printing


You need to clean the cartridges and the print head. Remove the cartridges and clean the nozzles with a damp cloth, let it dry for a few minutes and then insert them back and now try to print a few pages, it should take about 5 - 6 prints before printing properly.

Jan 26, 2010 | Lexmark X2690 All-In-One InkJet Printer

Not finding what you are looking for?
Samsung ML 1610 Laser Printer Logo

79 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Printers & Copiers Experts

Whit
Whit

Level 1 Expert

185 Answers

HEMANT GROVER

Level 2 Expert

166 Answers

CheckitRight
CheckitRight

Level 3 Expert

1349 Answers

Are you a Samsung Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...