Question about Cell Phones

2 Answers

Hello fixya i;ve recently bought a nokia6280, the problem i have now is the camera wont work now, when i press the camera button to come on, it now comes on the screen 'operation failed' then 'camera on standby' and do i want to continue, when i select continue 'operation failed' comes onscreen again and that goes the video camera too! it would great if you could shed some light on the subject please! thank you fixya!

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

First checkz its software problem or hardware if it hardare camera ic problem if it software reset firmware

Posted on Feb 16, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The problem I have my two nokia6280 all want to use an object comes Alkamirh

nokia6280 camera standby
We have entered into some forums and saw a large number had the same problem
Some of them give them some advice, some of the modernization Insahohm to take the company
Do you find the solution

Posted on Nov 15, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trouble installing the memory card.


Is this the original memory card? if not! and you recently bought one card, sounds like the right configuration but it is a bit to long for the camera body. I suggest taking it to a camera shop to make sure it is the right card.

Mar 30, 2012 | Konica Minolta Dynax 5D / Maxxum 5D Body...

1 Answer

My camera wont tur onwhat can i do?


Hello....This will be short and sweet....Check to see if the battery is charged and installed properly...I had this troblem with My FujiFilm camera...In my camera...you can install the battery backwards and it will not work...so check the battery charge and installation first....Let me know what happens......I hope this was helpful......PEACE......

Mar 08, 2012 | Sony Cyber-Shot DSC-P150 Digital Camera

1 Answer

I've just bought a canon g12 camera but the display is in Chinese, I need English, how do I fix?


Press the playback button (right-pointing triangle) to enter the playback mode. Press and hold the FUNC/SET button and then immediately press the MENU button. Release the two buttons, use the cursor buttons to select a language, then press the FUNC/SET button.

This is from the "Setting the Display Language" section of the manual (page 21 in my copy). If you need an English-language manual, you can download one from
http://www.usa.canon.com/cusa/professional/products/professional_cameras/pro_ps_digital_cameras/powershot_g12#BrochuresAndManuals

Jun 11, 2011 | Cameras

1 Answer

Dear sir/madam, Recently, I've bought a Nikon D3100 camera. I'm new to the world of d-slr photography and these types of cameras. My camera worked fine but now I have a small problem. The...


If it is new then it should still be under warranty. If so I would suggest taking the camera back to the store that you purchased it from and ask if they can fix or replace the model.

Jun 08, 2011 | Nikon D3100 Digital Camera

1 Answer

I recently bought a used canon EOS 400d which was


Be aware that the built in flash does not pop up automatically in all picture modes. Try it when in the different modes (on the mode dial) and see what I mean. Does it popo up when manually opened ?, (small button on front left hand side of the viewing pentaprism/flash housing.)

Oct 02, 2009 | Canon EOS 400D / Rebel XTi Digital Camera

1 Answer

Camera problem


could be either camera module failure or flexcircuit cable failure, just take it to authorised nokia care, as it is a little bit difficult to replace these parts, or even get them

May 30, 2009 | Nokia 6280 Cellular Phone

2 Answers

"Check connections" error message


Turn the camera on. On the camera, press the 'MENU' button and go to the third page of the 'Set Up' tab. For the 'USB' field, select the 'Mass Storage (USB DIRECT-PRINT)' option, instead of the 'PTP(PictBridge) option. This worked for me when I was getting the "Check connections" error message, about a minute after pressing the 'USB' button on the cradle, while the camera was in the cradle and I was trying to download my photos from the camera to my computer.
Good luck

Mar 01, 2008 | Casio Exilim Zoom EX-Z700 Digital Camera

1 Answer

No picture taken when shutter release is pressed


if you see no reation of the pressing of the button i.e. no focusing, no error message nothing , then most probably a simplest problem , the shutter release button may not be working for few reasons : 1) defective switch. 2) defective flex cable. 3) camera exposed to some physical jerk or dropping resulting into disalingment between inner switch and the shutter release button.

Jul 09, 2006 | Fuji FinePix S5500 Digital Camera

Not finding what you are looking for?
Cell Phones Logo

Related Topics:

206 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cell Phones Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

William Alequin

Level 3 Expert

928 Answers

Are you a Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...