Question about Hotpoint First Edition FEW12 Front Load Washer

1 Answer

Printed wash cycle info missing from front of machine

The printed wash cycle info has rubbed of my mothers machine, can anyone tell me the letter of the quick wash cycle. Thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 24 Answers

Quick wash cycle for the Hotpoint FEW12 is 'K'

A 95* White cotton, heavy soil ........ 5.5kg 2hours 30/40 mins Fast spin
B 40* White cotton Heavy soil .......5.5kg 1hour 40/50 mins Fast spin
C 95* White cotton and linen without special finishes......5.5kg 2 hours 20/30 mins Fast spin
D 60* Colour fast cotton, linen or viscose without special finishes......5.5kg 2hours 5/15 mins Fast Spin
E 40* Non-colour fast cotton, linen or viscose.....5.5kg 1hour 40/55 mins Fast spin
F 50* Synthetics, coloured nylon, polyester, acrylic & cotton mixtures, cotton or viscose with special finishes, coloured polyester & cotton mixtures.....3kg 1 hour 5/15 mins Slow Spin
G 40* Acrylics and tri-acetate blends of these fabrics with wool, polyester & wool blends....3kg 40/50 mins Slow Spin
H 40* Wool, shrink resistant machine washable wool, woolen blankets..... 1.5 kg 1 hour 15/25 mins Fast Spin
H...(Wool mixtures with cotton or rayon.....2.5 kg)
J 30* Silk, printed acetate.....3kg 55 mins/1 hour 5mins... Slow Spin
K Quick wash for freshening up lightly soiled items. Warning... not for woolen, silk or delicate items.....1kg 35/45 mins Slow Spin
L Cold wash, cold fill only, no heating action....3kg 55mins/1hour 5 mins Slow Spin
M Rinse and Fast Spin... cotton......5.5kg 55 mins/1hour 5mins...Fast Spin
N Rinse and Slow Spin... Delicates....3kg 30mins Slow Spin
P Fast Spin .... cotton.... 5.5kg 15 mins Fast Spin
Q Slow Spin.... delicates.....3kg 15 mins Slow Spin

Hope this helps

Sue

Posted on Aug 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ignis Bella 60 front load washing machine inner tub has developed sideways play . It rubs against sides during cycle with soft rubbing sound and stucks


at the back of the washing machine is an inspection plate not large
turn off the power and pull the plug from the wall and turn it from the rear and see what is happening

Mar 28, 2015 | Washing Machines

1 Answer

General electric washer makes clacking soun in wash cycle every time it cycles.


There is a known problem with this GE model. Remove the front panel, look at the base plate below the motor. Can you see that it has been rubbing there? On that model the "front apron bracket" fails allowing the motor to rub againist the base. You will need to replace the apron with the new design they have out. Here is the part to order.
You may also check this by removing the front and run a load of wash and watch the motor.
Please post back your findings.

Nov 02, 2012 | General Electric WHRE5550H Top Load Washer

1 Answer

Front loader stops mid cycle and blinks Er until start button is pressed, the cycle will continue, and sometimes repeats this scenerio three -four times each load. any thoughts anyone?


The control board has detected an error. Press any button to wake the machine then wait for 5 seconds. Press and hold the START/PAUSE and CANCEL buttons simultaneously then the failure code will appear in the display as an "E" followed by two numbers, a number and a letter or two letters as long as the buttons are held. The control will beep and the Door Lock, Wash, Rinse, and Final Spin indicator lights will flash. Post back the code for further advice.

Jan 11, 2011 | Frigidaire Washing Machines

1 Answer

Washing machines door open light is on, but door is shut


Found it for myself - F7=motor fault. New motor brushes fixed it. This error code will come up if the motor fails to turn on demand at any point in a program, be it filling, in a wash cycle, or spinning.



Hope That Helped;
Thanks For Using
FixYa.com
George
Please Rate Me

May 23, 2009 | Whirlpool AWM8163 Front Load Washer

1 Answer

Wash Cycle Guide has rubbed off my machine


In your browser bar, type in HOTPOINT UK
Then in the drop down menu, click on Hotpoint uk
then click on After sales
Then click on Download instruction books.
Put your model of washer in box in capitals, and down load to your hard drive or printer..
Thanks.Plz rate my solution and feel free to leave a comment

Jan 08, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Washing programme information


You can download the manual from the link below: http://www.serviceforce.co.uk/pdfs/U23117.pdf Please update the question & let us know if the information given was useful to you - Good Luck!

Aug 12, 2007 | Zanussi W1042W Front Load Washer

Not finding what you are looking for?
Hotpoint First Edition FEW12 Front Load Washer Logo

877 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

freddyfox

Level 2 Expert

236 Answers

ptpumpman

Level 3 Expert

407 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...