Question about Projector Accessories

1 Answer

How to check for lamp life of my mitsubishi multimedia Projector xd 450u (DLP)

How can i check lamp life of my Mitsubishi multimedia projector xd450U Hi ,
I have Mitsubishi XL 5980U projector , but not able to reset the lamp hours .
So even after changing the lamp ,it still indicates to change the lamp.
I have tried up ,down and enter but it does not work.
Please give u r advice
Thanks,


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

This should work:

How to reset the operation time meter
Plug in the power cord, switch on the projector, and
reset lamp time by pressing the (left and right arrow) and POWER buttons on the control panel simultaneously.
Important:
• If the 3 buttons was not pressed at the same time,
the lamp time may not be reset.
• Please confirm the TEMP indicator illuminates
about 2 seconds and the lamp time has been
reset.
• The projector will not turn on if you do not secure
the lamp lid.
• You must reset the operation time meter after you
replace the lamp.
• Do not reset the operation time meter unless the
lamp has been replaced.

Posted on Jul 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset mitsubishi VLT-XD221LP projector lamp reset Kumar Salem


Reset of the lamp operation time
1,Connect with the Power cord, and turn the power on.
2,with a signal supplied to the projector.
3,Menu--INSTALLATION--LAMP TIME RESET-and press
ENTER button to reset lamp operation time.
any questions, feel free to contact me
We supply original projector lamp,bulb,accessories,Lcd panel,Lens,DMD chip,color wheel,motherboard,powersupply,ballast... with high quality and competitive price.
have a nice day!
Jerry,Lampdeng Limited

Oct 07, 2013 | Mitsubishi VLT-XD221LP Replacement Lamp...

1 Answer

Change projector lamp


please ask for the authorization code photoshop cs3

Oct 01, 2012 | Mitsubishi VLT-XD510LP Projector Lamp

1 Answer

Acer x 1130 dlp projector not lighting but showing red light


1,Check the fans ,whether the fan is running,when you turn on the projector
2,if the fans run, then ,check the lamp or lamp ballast
Have a good day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry Lampdeng Limited
Mobile: 0086-13178867858
Wechat ID: 008613178867858
Whatapp ID: 008613178867858
Skype: lampdeng@hotmail.com
http://www.lampdeng.com

any questions, feel free to contact me
have a nice day!
Jerry Lampdeng Limited

Sep 25, 2012 | Acer X1130P 3D Ready DLP Projector...

1 Answer

How do i clean filters


This particular projector does not have filters. As per their website, "The filter free design of this projector, along with the long life lamp (up to 4000 hours operating time, mean less ongoing maintenance on the projector." from https://www.mitsubishielectric.com.au/1630.htm.

Cleaning instructions from the manual are: "Cleaning of the projector and the ventilation slots

Use a soft cloth to clean the projector and the ventilation grilles. When the grilles become dirty, wipe them with a soft cloth dampened
with diluted mild detergent, and then wipe them with a dry cloth."

Mar 15, 2011 | Mitsubishi XD110U / SD110U Projector Lamp

1 Answer

I am told the light is very dim. Is this a sign the lamp is going bad?


From the first moment it is used, the lamp in a projector is losing lumens (a measure of light). Most projectors' lamps are good for 1500 to 2000 hours of use. Even at the halfway point, a significant dimming can be noticed.

If you do not have many hours on the lamp, you may have a defective lamp and should seek some sort of compensation from Mitsubishi or whatever retailer you purchased the projector.

Mar 09, 2011 | Mitsubishi VLT-XL8LP Projector Lamp for...

1 Answer

I get a blue screen on my misubishi sl1 projector lamp and no signal appears on the screen


Hi

Make sure the Computer Input is set to VGA, Computer, or RGB (depending on which projector model you have).

There are also known known hot-key combinations used to switch the laptop to its external VGA mode. If you are using a laptop.

Check the cables as well if properly connected both on computer and projectors end.

Hope this helps

Apr 02, 2010 | Mitsubishi SL1 projector lamp Projector...

1 Answer

Panasonic PT-60LCX64. What would happen if you


you won't get another warning for 2000 more hours on a lamp that is good for only 2000 hours (give or take). so, if you don't replace it, you run the risk of the lamp exploding at the end of it's life, sending shards of glass and mercury dust throughout the projector.

Nov 09, 2009 | Mitsubishi VLT-XL2LP Projector Lamp for...

2 Answers

I have only had my sony tv for 2 half years and it needs a bloody lamp already whats going on with sony it was one of the leading companys now its gone right down hill i should not have to pay out already...


Hi I am Vortash sorry to say lamps are notoriously thee major cause for 90% of projection tv failiures , and unfortunately you can never guess how long they will last .
Yes sure they say they will run for 3000 hours but not always as factors like posistion and airflow to the set will alter the opperating characteristics of a lamp the hotter they get the shorter they last , thats why there is no guarantee with a bulb once it is out of the packet . The next bulb you buy may last 3 years or it may last 2 or even 1 , so if you want your b8ulbs to last check that your set has a good airflow around it and that the fans are working correctly , that will pro;ong the life of your bulb .. regards Vortash

Jun 22, 2009 | Sony (XL-2400) Projector Lamp for...

Not finding what you are looking for?
Projector Accessories Logo

Related Topics:

2,087 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projector Accessories Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5612 Answers

color wheel light...
color wheel light...

Level 2 Expert

137 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Projector Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...