At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Kyocera mita KM 2530 wont print. Info gets to printer and blank pages come out. If it 1 page or 10 pages the right quantity of blank pages comes out. Fax prints fine and copiess are fine just no toner on paper for network printing. Have DL'd the most current drivers and no help there
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It sounds as if the paper size at the machine is set incorrectly. Try checking to ensure you cassette or bypass if that is where you are printing from is set correctly.
Try changing print driver and switch emulation to kpdl auto if not already there. If this doesn't work go to properties on driver under font and switch to bit map. Don't do this step unles yo have to it really slows down your printer.
Your charge corona grid is shorting out. It either has alot of toner built up on it, (from not cleaning when you change the toner cartridge), or the blocks are bad. You could also have a bad drum ground where the drum makes contact with the machine frame. Only once have I seen a bad drum cleaning blade.
it's the the expansion card on the main board in the middle, has a yellow circular cmos battery. Either its faulty or popped out during moving the machine. if faulty, replace.
×