Question about LG DLE2514 Electric Dryer

1 Answer

Tumble dryer when i came home from worktoday the load of laundry was still wet afteri put it going this morning.i put it going again aand the dryer turns like normal but does not dry the clothes.could this b something wrong with the filter.

Posted by on

  • ant3169 Jul 14, 2008

    thanks.whats the best way to clean the ductwork.


  • ant3169 Jul 14, 2008

    thanks


×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 148 Answers

Check the fiter,but mostly the ductwork coming out of the back probally full of lint,if ok I check the heating element

Posted on Jul 13, 2008

  • derek martin Jul 14, 2008

    they actually sell a dryer bush for that or you can use a small section of a chimminy sweeper,but the brush looks like the baby bottle brush,,a lot bigger of course,buy it at home depot for cheap money

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Not heating


If you can hear the dryer start and operate but at end of cycle your clothes are wet then it is likely (assuming the heater is turning on) that the fluff collection on the condensor unit is blocking its operation.
Refer manual at this site and follow instructions on page 20.

http://www.eirvik.is/gogn/L/t233c.pdf

Apr 19, 2014 | Miele Novotronic T230C Electric Dryer

1 Answer

E15 error code on hoover tumble dryer


Controls
  • The control unit on the tumble dryer will vary among different makes and models. The main purpose of the controls is to allow the user to select the drying cycle. You can choose the time and temperature setting on most units, while others allow custom settings such as moisture sensors and end-of-cycle alert signals. The controls may include a dial or a touch panel and LED screen display. Some tumble dryers allow you to independently select the appropriate time for the load you are drying and separate programs for temperature.
Motor
  • The motor inside the tumble dryer spins the basket to allow the clothes to tumble while being dried. The tumbling action allows the air to pass through the clothing to dry them faster. Heating laundry that is stagnant will likely dry the clothing on the outside while leaving damp clothing inside the pile. The constant motion, along with the heat and steam created by heating the clothing, reduces wrinkles. The motor also powers the fan that delivers the heated air to the basket of laundry. The heater can be an electrical element or gas powered.

Jan 15, 2013 | Dryers

1 Answer

Did a load of laundry this morning...took that load out of the dryer, put in another load and when i went to start it.. the dryer would not turn back on..check the wires, dryer vents...switched the...


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Sep 10, 2011 | Whirlpool Dryers

1 Answer

Hello....my tumble dryer was working perfect until my son decided to put soaking wet washing into it....and i mean soaking wet....now the drum doesnt turn but the heat still comes out....please help as...


did the belt come off due to heavy load? if it is still n and didnt blow a breaker it may have blew the motor, you would have to take the back off to inspect, dont forget to unplug first

Jan 18, 2011 | Dryers

1 Answer

Have a Maytag Dependable Care dryer. Model MDG9606AWW. The glow bar comes on, gas lights and stays on about 30 seconds, go off for about 30-60 sec. then comes back on for about 10-18 seconds. Then goes off...


Inspect the dryer venting from the rear of the dryer to the outside vent hood of the home.
If there's a restriction in the vent--the clothing in the dryer takes longer to dry.
When an LG dryer is functioning normally---the time required to dry laundry is determined by the *Sensor* located on the drum side of the lint filter housing and by the main control board.
When laundry is near dry--any Time Remaining on the control panel that is *not* needed will be eliminated---except for the last 6 minutes.
The final 6 minutes of any LG automatic cycle is for cooling down the laundry before the dryer ends the cycle.
If a dryer *counts down* to the last 6 minutes but the laundry is still not dry--the computer will allow the dryer to run until the laundry has dried or defaults (not drying within the additional time allowed).
Dryer vents that are longer than 8 feet with more than (2) 90 degree turns--can affect drying performance.
Setting the DRY LEVEL selector to *Very Dry* will solve most dryability issues. In homes with abnormally long vents--even the longer run time in the *Very Dry* setting is usually not sufficient to dry laundry loads.
Reducing the length of the vent or starting a second cycle becomes necessary to fully dry the clothing.
If a second cycle was started---only the amount of time that is needed to dry laundry will be used before dropping to 6 minutes and then the cycle will end with dry laundry.


LG gas dryers are more sensitive to venting length and air flow resistance. The gas burner can cause a rapid increase in temperature compared to an electric burner.
Rapid temperature rise in a gas dryer leads to premature burner shutdown (longer time required to dry laundry).
The gradual temperature increase of an electric element is more "forgiving" in homes where the dryer venting is less than ideal.

Apr 01, 2010 | LG DLG5932W Gas Dryer

1 Answer

Not dry laundry


No I understand that .. Is your dryer 220V electrical source? If so it sounds like you have an electrical problem with the voltage supply to the dryer itself. I for some reason the dryer is only getting 110V that will allow the drum and dryer to function but the heating element will not .. You may need to talk to an electrician if you are capable of doing that yourself

Mar 27, 2009 | Speed Queen AES17AWF Electric Dryer

1 Answer

Old Kenmore Dryer Stopped Blowing Heat


either the heating element is out or the limit switches are out one or the other

Jan 24, 2009 | Kenmore 62602 Electric Dryer

1 Answer

Laundry appliance installation


not recommended may cause vibration issue.. my preference ? concrete or tile especially on front loads

Aug 19, 2008 | Kenmore Elite HE4 Electric Dryer

Not finding what you are looking for?
LG DLE2514 Electric Dryer Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Dryers Experts

Tim Whalen

Level 3 Expert

3069 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a LG Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...