Question about Projection Televisions

1 Answer

Hitachi 53sdx20bb ultravision the sync on the red is off, magic focus pauses on the red then 4 looks like 3d vision

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Looks like you have an issue with the IC convergence modules. I'd recommend calling in a service tech.

Posted on Jul 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Goes through magic focus than in the middle stops and displays #5


This is a common problem. Its called a convergence failure.

Problem #1) Convergence

Symptoms:

  • Screen Looks 3D
  • Colors wont align
  • Video may look distorted
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Feb 19, 2010 | Hitachi 46F500 46" Rear Projection...

2 Answers

I have a hitachi ultravision and the blue is off center.


your convergances amps ics have failed and need to be replaced alone with the 2 burnt resistors you will find then run magic focus

Nov 30, 2009 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Hdtv that has double vision


There are two common problems with these sets.

Problem #1) Convergence

Symptoms:
  • Screen Looks 3D
  • Colors wont align
  • Video may look distorted
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pnghttp://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Oct 23, 2009 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

''Magic Focus'' doesn't fix ghosting problem


YOU HAVE CONVERGENCE PROBLEM THE PARTS NUMBERS STK392-110 YOU HAVE 2 OF THEM THEY ARE BAD

Aug 28, 2009 | Hitachi Projection Televisions

1 Answer

Poss. convergence problem with Hitachi 53UDX10B Ultravision


You have convergence problem. Either bad connections on ics, ics are bad or voltages to convergence circuit are missing. There are no bulbs in this set. 3 picture tubes,red,green and blue produce a picture than when alighned(converged) correctly on top of each other gives you a color picture.When not you get the effect you are describing. Frst you can try the magic focus in the menu.

Apr 20, 2009 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Hitachi TV HELP!


Hi, magic focus button is behind a small door on the front of the set just below the screen, I don`t think it is going to help I believe your convergence IC`s have failed,try pushing it once and let it finish, if still 3d image you need to call a tv tech, good luck, video-tek

Feb 09, 2009 | Hitachi Projection Televisions

1 Answer

PROJECTION TV HITACHI ULTRAVISION COLOR CONVERGENCE PROBLEM


it sounds like your blue convergence ic is getting weak you need to replace the ic's STK392-110 and you should replace both because when 1 is bad the other will go real soon. They are inexspensive at the sight I posted and you will also get free tech online support if you purchase them there.
http://servicemanuals.vstore.ca/

Apr 12, 2008 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

53UDX10B 53 in. Rear Projection "3D vision"


the convergence IC`s and associated resistors have to be replaced, do not repeatedly push magic focus or the alignment after the parts change out will take longer which of course means higher repair bill, good luck

Nov 10, 2007 | Hitachi 53SDX01B 53" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...