Question about DVD & Blu-Ray Players

2 Answers

I have purched a SonyKDL32S3000 TV a RDRHXD870 DVD,and the TV works fine with a good signal,but the DVD has no % of signal working at all, I have tryed this with a HDMI cable and a Scat cable. please help.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • DVD & Blu-Ra... Master
  • 19,396 Answers

Check that the dvd input settings are set on the proper tv input channel to record (eg record from HDMI)

Posted on Jul 13, 2008

  • Ginko
    Ginko Jul 13, 2008

    In other words check that the dvd is not recording from one of the pre tuned channels, but it is set to record from tv input.

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • DVD & Blu-Ra... Master
  • 13,433 Answers

Please have a look into the user manual
http://pdf.crse.com/manuals/3113760121.pdf

Check that you have setup the connections and settings correctly?

Posted on Jul 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get a signal?


The only thing between the player and the TV is the cable. Make sure it isn't the problem by trying a different cable or a different input on the TV.

Sep 30, 2015 | LG Electronics - DP132 Multi-Format DVD...

1 Answer

'NO SIGNAL' display on TV


are you with a tv provider? try unplugging your tv and all, wait for couple moments a nd replug in. then you will have to wait for the tv to catch up. it should give you the display. good luck

Jul 20, 2013 | LG DVD & Blu-Ray Players

1 Answer

My memorex combo dvd & vhs player is not working right. can you help me? the vhs player works fine, but the dvd player display's a split screen on the tv with a large yellow box with the word PSCAN....


PSCAN is a short form for Progressive Scan - a line scanning format used for High Definition TV. Standard TVs use Interlaced scanning. On your DVD/VHS player, the VHS is an analogue signal recorded in interlaced mode so is fine for a standard TV. The DVD is a digital signal and cazn be processed for progressive scan output in order to produce a better picture on a High definition TV (or a TV capable of handling progressive scan). If you cannot to your TV via the HD outputs then you should be able to set the DVD player to output interlaced instead of progressive scan.

Mar 05, 2011 | Memorex MVD4540 DVD Player/VCR

1 Answer

Recorder has stopped decoding SD digital TV but analogue TV is OK


Dry joint - faulty capacitor on the PC board of the decoder. Found by wiggling the components and resoldering

Feb 07, 2010 | Panasonic DVD & Blu-Ray Players

1 Answer

Sony dvd rdrhxd870 Set to record 2 programmes the first programme is recorded and then the guide plus channels all shut down and I have to reset again. Tried 24hour shutdown as Sony shop suggested no luck


Contacted Sony shop Cheshire Oaks and they said that It is not a fault in the dvd. The north west is going thro having to reset tv's as the Analogue Signal is being shut down. The Transmitters are interferring with the Hard Disc on my dvd and lots of other people are also having this problem. Although the date for the shutdown was 3rd Dec. not all the analogue programs have been turned off. I will have to wait until
the week before Christmas and things should be back to normal.

Dec 07, 2009 | Sony DVD & Blu-Ray Players

1 Answer

Sony DVD Player worked fine forever, suddenly gets 'No Signal' on


check the video is going from output on the dvd player to the input of the tv. Good Luck.

Nov 12, 2009 | DVD & Blu-Ray Players

1 Answer

S-video connection of a DVD to 40" sony bravia


I need to know if you see a no signal message on tv or just a blank screen. Please provide this information so that I can assist you.

Thanks,
Sai.

Feb 01, 2009 | Sharp DVMX1U DVD Player

1 Answer

VCR will play, but not record.


You gotta connect the signal cable to the input of the vcr and in the output of the vcr other cable to the tv input,when you got to record some program you need put the channel number on the vcr not in the tv if you conect the vcr to the tv in the avinputs the tv will be in video mode,because the vcr receipt the signal.
Good luck

Apr 13, 2008 | Samsung DVD-V5500 DVD Player/VCR

2 Answers

Panasonic DVD Recorder - Digital tuner stopped working


Is your recorder hooked up to the new convert box for digital antenna reception?
I am currently researching the convert boxes for my dvd recorder. I found that some dvd recorders already have digital converter boxes already installed. This might be the case for you.

Mar 08, 2008 | Panasonic DMR-EX85EB-S DVD Recorder/HDD...

Not finding what you are looking for?
DVD & Blu-Ray Players Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top DVD & Blu-Ray Players Experts

kakima

Level 3 Expert

96372 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a DVD and Blu-Ray Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...