- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you are inserting non original cds, cds you make from your pc or cd copies sometimes they dont read, another reason is to make sure that you are inserting the disk with the correct side up, it will show you in the cd changer magazine slots. If none of this solves your problem then you have a defective cd mechanism and you need to replace or repair the changer. Very common problem with JVC Cd Changers, I used to replace them all the time and they tend to skip alot as well, get yourself a Pioneer if money is ok if not then follow my steps.
Good luck and dont forget to rate and vote for me if I helped you.
Nope. Its getting to the end of its days. I'm guessing by your description you tend to play your music loudly like I do. Well when you do that it causes vibration. Vibration+electronics=Short life span.
Make sure the cds are the right way up.
Try listening to the cd mech to determine if the cds are being loaded.
If the mech is going through the motions then the problem could be the lens is dirty, the laser has failed or the spin motor is faulty.
if there is no sound of the cds being loaded, it could be a power supply problem. Try a reset or just unplug the changer then re connect it.