Question about Sanyo DS31590 31" TV

1 Answer

No picture or sound

All of a sudden i have no picture or sound. The remote turns the tv onn because the green light is on and the cable box lllight is green but blach screen and no sound. what to do? thanx I have a sanyo 42 in screen.

Posted by on

  • Anonymous Jul 13, 2008

    on sudden just blak secreen

  • 1tealmonkey Jan 03, 2009

    the tv is on with no picture or sound and then shortly afterwards the tv shuts off

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Sanyo Master
  • 5,138 Answers

Shorted hori output and bad FBT flyback transfomer.

Posted on Dec 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My JVC 27" can not be turned on or off with the remote or the on an off button. Any ideas?


try all in one remote/it can be the infrared on tv not picking up signal/point remote does light flash on tv ?

Dec 23, 2009 | JVC AV-27530 27" TV

1 Answer

When i on the tv by remote the red standby light turns into green and i hear the tv sound but not picture and after a one or two second the green light turns into red. The tv goes into standby mode when i...


the high voltage or flyback transformer is not working.the sound runs off a separate fixed power supply.if you run your hand across the screen,is there static?that would mean the high voltage is ok but there is another circuit fault

Jul 08, 2009 | Sony FD Trinitron WEGA KV-36FS120 36" TV

1 Answer

Sony KV-36FV27 too dark, pink or green tint, 5 blink error,


Fuzzy,blury picture in CRT tv tube.Tv in long use not repairable.Tv tube is dying,it junk.

Mar 27, 2009 | Sony FD Trinitron WEGA KV-36FV27 36" TV

1 Answer

KP-53HS10 Real HD


On this TV there is only one input for any HD resolution. Input # 5 is the component input i.e. red/green/blue cable. Just get the correct cable and match colors from cable box to TV this will allow the TV to display 1080i resolution ( only one this TV supports ). FYI you will also have to connect the red and white cables to the appropriate inputs to get any sound because red/green/blue connectors are just for video display not sound. Once your connected you'll be able to access video # 5 be sure to set your cable box to 1080i resolution also. I hope this helps later J.

Dec 02, 2008 | Sony KP-53HS10 TV

1 Answer

Suddenly no sound & no picture overnight: is my TV dead?


If you have static siugnal, sure TV is not dead.

Check the aerial cable, ensure it is well plugged in and getting signal.

If you are using a receiver box, check cables to TV and receiver (freeview, sat, cable etc.), try setting channels on receiver again, if it does not work but you get static, then either the cables or receiver are defective.

Test the TV on standalone , connecting it to an external antenna.
Tune again the channels, and save the preset.
If still no signal then the antenna socket on the TV may be defective.

Try using the TV with a DVD.

If you can watch DVDs, and TV is not keeping channels preset, and you tried all the above, at this point htere may be a fault in the tuner card inside tv.

Call the phone number listed on tv user manual to get support, and eventually repair it.

Oct 03, 2008 | Panasonic CT-36HL43 36" TV

1 Answer

Power button Flashes


For the first one, please list the model number and count the blinks. Also, can you please post each problem separately. It will get too confusing trying to address 3 sets with different but similar problems.
Thanks,
Dan

Mar 18, 2008 | Televison & Video

1 Answer

Tv/remote input problems


Try plugging your cable box in using a/v cables (red,white,yellow) and see if you have a picture on a different input from the box. If so, go into your general settings in the box and change the output channel to 4 instead of 3. Then try your TV on 4 and see if your picture comes in. I have seen TV tuners go out on just one channel before.

Feb 24, 2008 | JVC AV-27230 27" TV

1 Answer

Philips 29 in silver color


Intermittent HV feedback loop circuit will cause this. Also dust and ambient temperature play a large part in this circuit's operation....accordianman

Oct 20, 2007 | Sony FD Trinitron WEGA KV-27FV310 27" TV

1 Answer

Blach block out


if your big black square starts about the middle of the tv & goes down close to the bottom, you have closed caption text turned on. normal closed caption is small, but test caption, is just a big black box with no writing in it. go into your menu & shut it off, it could even be a button on your remote called, "caption", or "cc". good luck.

Dec 27, 2006 | Samsung TXJ2067 20" TV

Not finding what you are looking for?
Sanyo DS31590 31" TV Logo

Related Topics:

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69654 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...