Question about Toshiba Projection Televisions

1 Answer

Alignment - Toshiba Projection Televisions

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toshiba Master
  • 8,617 Answers

Can you be more specific and reply with your model number and I will try to help you. Are you saying you cant adjust the convergence? Please respond to this same post, but remember to include the model number of your set.

Posted on Jul 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 3 thin lines red, green,blue at the top of the screen, from side to side and slightly arched. I tried the convergence, but it didn't help. Is this a costly repair or can it be done myself?


It is alignment problem & needs lot of patience, expertise to align LCD panels. To align slightly loosen the screws on red & blue panels. Switch on the TV with input source as computer as it has steady graphics. Align for red & blue by slightest movement using light taps with screwdriver sideways. When you are satisfied, tighten the screws. If it is one pixel height line, just neglect it. That much error can be expected.
WARNING: If you are not sure, do not carry out the alignment. Otherwise it will go more out of alignment.

sonsunny

Jun 14, 2011 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Colors out of alignment


you moved this set huh? alignment is out, magnets slid out of place on align coils the a convergance alignment preformed (sometimes u get lucky and the coils can be put back perfect and then no alignment needed)

Nov 22, 2009 | Projection Televisions

1 Answer

The colors are not aligning correctly. I have tried to use the magic focus but it still did not align.


You have a convergence problem. Go into the menu and you should find a convergence alignment menu, try to align it there, if you can`t then you probably need local help from a tv repairman. good luck

Nov 17, 2009 | Hitachi 61UWX10B 61" Rear Projection...

1 Answer

I cannot get my Hitchai 50EX8K aligned. There's a


replace the convergence amp ICs and also check the low ohm resistors

May 17, 2009 | Hitachi 50EX20B 50" Rear Projection...

1 Answer

Need to align my mitsubishi wd-73733 dlp tv


We TV technicians don't go into alignment unless absolutley needed. I would stray away from alignments period unless you understand all of the ramifications that come with them.

Jan 08, 2009 | Mitsubishi WD-73733 73" HDTV

1 Answer

Colors are out of alignment


There is an alignment mode that you can get to. You must take off the back cover and look for the alignment switch I suggest that a tecnician do this because he has the propper tools and knowledge. If just an allignment is all it needs it should not cost that much. You have to try not to move this type of tv around because it is very sensitive and the slightest bumb can send it out of wach.

Nov 17, 2008 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Panasonic PT-53WX42


convergence IC bad
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Jan 01, 2008 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

Colors out of alignment; curved lines


Please stop where you are! Expert technicians rarely align manually = only when CRT changed or someone tries to
correct an electronic anamoly mechanically........
Curved lines are caused by defective IC's = STK392-560....
Found mounted to heatsinks on " G " PCB.........T.

Please rate solution offered and ask for more help, if needed.

Nov 12, 2007 | Sony KP-51WS500 51" Rear Projection...

2 Answers

Color guns out of alignment


It sounds to me like the convergence amps themselves have failed. Ic7001 and Ic7002, both are STK392-110 Sanyo built Ic's and not an expensive job for a qualified shop. When shopping around for a shop to repair it ask what they charge for replacement of the convergence amps in this unit. And take the unit to them to save pickup and delivery charges...
Have a great day!
Bill

Dec 21, 2006 | Panasonic PT-53WX53 53" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Dave Naylor
Dave Naylor

Level 3 Expert

834 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Are you a Toshiba Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...