How do I use the conference call feature? Thanks so much. I need to make a conference call in an hour so I'd appreciate a response asap!

To make conference call, call a number wait until answer if answer dial again another number do not end all active calls just hold and dial again as long as five numbers then, go to option select conference.

PLease do below listed Steps 1. make call 2. Put first call on Hold and make 2nd call 3. Open Option button and select Conference from menu Note: you need to active conference service from your service provider and also your phone has to supported conference service.. Thanks

Conference call is not a feature of the phone, but a feature of the telephone system in the company. Usually you press a sequence of keys like flash #02 to trigger this function in the phone system. If your company phone system does not offer the feature then you have to use an external conference call provider.

Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]

• Establish a conference call between yourself and two other parties.

1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call

• To remove yourself from a conference permanently (unsupervised conference):

• Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
• To put a conference on hold:
• Press [Hold]. The other two callers can still talk to each other.
• To split a conference:
• Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
• To disconnect one party:
• Press the line or intercom button of the caller you want to disconnect, then press [Rls].
• Press the line or intercom button of the remaining caller to resume your conversation.
• To independently hold two calls:
• Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

Here are the instructions for making a conference call on a Norstar system.

Conference [Feature] [3]

• Establish a conference call between yourself and two other parties.
  1. Make or answer the first call.
  2. Put the first call on hold.
  3. Make or answer the second call.
  4. After the second call is connected, press [Feature] [3].
  5. Press the line or intercom button of the first held call.
  6. Press [Rls] to end the conference call
• To remove yourself from a conference permanently (unsupervised conference):
  • Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
• To put a conference on hold:
  • Press [Hold]. The other two callers can still talk to each other.
• To split a conference:
  • Press the line or intercom button of one caller to consult privately while the other caller is on hold. To re-establish the conference, press [Feature] [3].
• To disconnect one party:
  • Press the line or intercom button of the caller you want to disconnect, then press [Rls].
  • Press the line or intercom button of the remaining caller to resume your conversation.
• To independently hold two calls:
  • Press the line or intercom button of the first caller, then press [Hold]. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press [Feature] [3], then retrieve the second call from hold.

You can use Feature 3 to start a conference call. You would have to hang up the intercom call to return to your original call.

Downloaded manual. Thanks for your offer of help. Happy problem is solved.

To establish a conference call between yourself and two other parties.
1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press feature button then 3.
5. Press the line or intercom button of the first held call (not required on the
T7100/M7100 telephone).
6. Press Release to end the conference call.
To remove yourself from a conference permanently
(unsupervised conference):
Press feature buton then 70. The other two callers remain connected. (Some
external lines may not support this feature. See your system
administrator.)
To put a conference on hold:
Press hold. The other two callers can still talk to each other.
To split a conference:
Press the line or intercom button of one caller to consult privately while
the other caller is on hold. To re-establish the conference, press
feature button then 3.
To disconnect one party:
Press the line or intercom button of the caller you want to disconnect,
then press Release button. Press the line or intercom button of the remaining
caller to resume your conversation.

Conference [Feature] [3]

• Establish a conference call between yourself and two other parties.

1. Make or answer the first call.
2. Put the first call on hold.
3. Make or answer the second call.
4. After the second call is connected, press [Feature] [3].
5. Press the line or intercom button of the first held call.
6. Press [Rls] to end the conference call

• To remove yourself from a conference permanently (unsupervised conference):

• Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)