Question about Fuji FinePix A330 Digital Camera
Before i capture the picture, image shown on LCD is clear but after i capturing image is shown with horizontal lines (slighty curved at ends) .
whereas the video clipping taken is very clear.
This is a firmware proble.
If the camera is less than a year old it will be replaced
if more than a year a refurbished one may be offered as a discount.
Check out customer support at Fuji site.
Posted on Jul 14, 2008
Tips for a great answer:
The display being hazy or blurred can be due to failure of the LCD or the CCD which is the optical sensor of the camera. So to confirm check the older picture to be seen on the display. Confirm this by checking the card on your PC. If the pictures are seen to be good, then the LCD can be faulty, fault on the linking cable or the control board.
However if the older images are seen well then the LCD is working correctly and the fault can be failure of the CCD- charge coupled device in the camera. If you have accidently exposed the camera directly to high intensity light / sunlight, then it is possible that it is damaged. Remove the battery and keep the camera aside to reset and try as a last resort. Get estimate before you decide. It will be good to have it checked at the authorised service as you do not have to run around for spares.
Please click on the link for tips to replace a LCD
Thank You for using fixya
Sep 24, 2011 | Olympus FE-310 Digital Camera
May 11, 2011 | Olympus FE-320 Digital Camera
Aug 17, 2008 | Digital Cameras
Aug 18, 2007 | Canon PowerShot S2 IS Digital Camera
Aug 31, 2005 | Olympus Camedia D-435 Digital Camera
Aug 30, 2005 | Nikon Coolpix 5000 Digital Camera
Aug 30, 2005 | Nikon D70 Digital Camera with 18-50mm Lens
Aug 29, 2005 | Nikon Coolpix 5700 Digital Camera
Apr 19, 2014 | Fuji FinePix A330 Digital Camera
May 24, 2012 | Fuji FinePix A330 Digital Camera
347 people viewed this question
Usually answered in minutes!