Question about Projection Televisions

Open Question

1996 Magnavox Model FP5251 G105 Big Screen

Hi we recently got a 1996 Magnavox big screen that needs some work. The picture is quite discolored and the images sometimes have a whitish glow around them at time. The sound is just fine the picture is just quite annoying to watch. All three circuit boards are very dusty inside. If you haven any tips on how we could fix it let is know thanks! ~ The Casteel's

Posted by on

3 Suggested Answers

Slinteriors
  • 8617 Answers

SOURCE: hello thanks the model # is FP5251 G105

Thats the PTV711 chassis phillips magnavox. I would suspect the vertical output IC needs to be resolderd. Its located on a aluminum heatsink and should have vertical stamped on the board near where the IC is located. Often when the vertical drops out it causes the CRTs not to light as a safety feature to protect the tubes. let me know if you need more assistance.

Posted on Jun 01, 2008

Slinteriors
  • 8617 Answers

SOURCE: hello again!!!! model# is FP5251 G105

There should be three circuit boards on that model a small board on the right then a larger board in the middle and another large board on the left the vertical IC will be located on the middle board it will be attached to a aluminum heat sink.

Posted on Jun 01, 2008

Slinteriors
  • 8617 Answers

SOURCE: magnavox epp5251 g105, it is foggy, the only color

The a problem which is caused by the picture tubes ( CRT) coolant needing replacement. You can get the kit which contains coolant for the tubes plus a cd with detailed instructions with pics on how to do the procedure.
http://servicemanuals.vstore.ca/product_info.php/pName/av48wp30-convergence-repair-kit/cName/convergence-repair-kits

Posted on Jun 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW TO MAKE THE PICTURE BIG ON THE SCREEN FOR PHILIPPS HDTV MODEL SIPP91000/37


Hi

Thanks for using FixYa. You'll need to use the Zoom feature on your remote to make the picture big on the screen.
Please do rate the solution and revert for further assistance.
Thanks
Rylee

Nov 24, 2009 | Philips Projection Televisions

2 Answers

I have a magnavox big screen tv the picture is pretty dull. I was wondering how i can fix that problem


First try cleaning the mirror and the tops of the picture tubes. If this doesn't help, you'll probably have to change out the CRT coolant.
good luck

Sep 02, 2009 | Projection Televisions

1 Answer

Can you replace the picture tube on a big screen maganavox tv?


yes it can be replaced.but the tubes are costly to get replaced.you can get the parts at www.partstore.com or at www.shopjimmy.com thanks.

Jul 11, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Old magnavox 52 inch big screen tv - screen rolls, jumps, loses c


the screen on my hdtv has alot of marks on it how do i get another

Feb 26, 2009 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Philips big screen tv


THE PICTURE IS FADED, IT HAS LOST ITS BRIGHTNESS ANG LUSTER. DOES THIS MEAN IT NEEDS NEW BULBS

Oct 30, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Big screen problem


http://servicemanuals.vstore.ca/index.php/cName/phillipsmagnavox-tv-parts

Jul 21, 2008 | Philips Magnavox 9P6034C 60" Rear...

1 Answer

Hello again!!!! model# is FP5251 G105


There should be three circuit boards on that model a small board on the right then a larger board in the middle and another large board on the left the vertical IC will be located on the middle board it will be attached to a aluminum heat sink.

Jun 01, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Hello thanks the model # is FP5251 G105


Thats the PTV711 chassis phillips magnavox. I would suspect the vertical output IC needs to be resolderd. Its located on a aluminum heatsink and should have vertical stamped on the board near where the IC is located. Often when the vertical drops out it causes the CRTs not to light as a safety feature to protect the tubes. let me know if you need more assistance.

Jun 01, 2008 | Projection Televisions

1 Answer

Picture issue with Philips 64" Big Screen


don't know if this is same problem or not but try this:
· http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
· http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
http://www.keohi.com/keohihdtv/brandspecific/philips/philips_convergence_geometry.html

Dec 05, 2007 | Philips Magnavox 9P6034C 60" Rear...

3 Answers

MAGNAVOX BIG SCREEN TV


Hi, I am having the same exact issue with mine. Although, it is only about 2 yrs old. We are still trying to find out what is wrong with it.

Aug 01, 2007 | Philips Magnavox 51MP392H Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60667 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...