Question about Computers & Internet

5 Answers

I have a RS-4i stimulator for back pain and my unit is saying to call for servicing. The last time this happened I called the company and they walked me through a sequence of codes to put into my machine and it was ready to go. I now have the same message to call for service and Rs medical is closed until Monday and I need to use my machine now. Does anyone know how to reset it or know the reset code?

Posted by on

  • 4 more comments 
  • April Schmelter Feb 20, 2009

    I have a RS-41 stimulator & it reads "needs to be reset" anyone know the code to reset it? Please help! Thank you

  • Anonymous Apr 08, 2009

    need codes

  • Anonymous May 03, 2009

    how do i put the codes in

  • Anonymous May 04, 2009

    What do you do after you enter the code?

  • Anonymous May 18, 2009

    Did anyone happen to get the codes and can you explain how to put in? Thanks.

  • Anonymous Mar 31, 2014

    Error ff

×

Ad

5 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Does anyone have a copy of the sequence of codes for the RS-4i stimulator

Posted on Nov 12, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have the same one, when I had toreset it the people on the phone told me to put in ...D89B.... i hope it helps.

Posted on Apr 22, 2009

  • Terry o Jan 10, 2016

    I put in those codes. How do you lock it in?

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I need the codes to reset the RS Medical RS-4i Stimulator

Posted on Sep 07, 2009

  • spoiledrotin Sep 07, 2009

    Now mine says I have exceeded the attempts to reset. I think it is about time for it to become a boat anchor.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Turn it on
Then push ch. 4 - button
using the + buttons show
ch. 1 as B
ch. 2 as D
ch. 3 as 8
ch. 4 as 6then the power off
when the screen goes blank you can turn it back on.
IT worked for me when I called them today.

Posted on Nov 02, 2012

  • scrappinvill
    scrappinvill Nov 02, 2012


    turn it on
    Then push ch. 4 - button
    using the + buttons show
    ch. 1 as B
    ch. 2 as D
    ch. 3 as 8
    ch. 4 as 6then the power off
    when the screen goes blank you can turn it back on.
    IT worked for me when I called them today.

×

I have the same exact problem, did you ever get a copy of the sequence of codes? thanks

Posted on Sep 28, 2008

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: I have a RS Medical RS-4i stimulator , how do I reset it ?

This is the code that I was given about 7+ years ago to reset our RS Medical RS-4i Stimulator and it worked fine.

Turn unit on & press ch. 4. Then you press ch. 1 until it shows a "F". Then ch. 2 until it shows a "7", ch. 3 until it shows a "B", & ch. 4 until it shows a "A".

Hope this helps.

Posted on Apr 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

6 Answers

Waiting for rs


I was having the same problem just a moment ago but I got it to start working again. Here is how I got it to work. When you set your compex to charge it will charge for a few seconds then show the "check waiting for rs". When that, happen push the power button off and on, once that is do it well start to charge again but just for a few seconds long than the first. You will get that massage again "check waiting for rs". All you have to do is keep turning off and on the compex when you see the rs massage. You should notice the compex charging longer now. Once you hit a charge time of at least 21 to 23 seconds it should continue with no problems. I hope this method works out for you.

Dec 21, 2013 | Compex Sport Elite Muscle Stimulator

2 Answers

Well my phone is saying prepaid service disabled and I have never seen that before. Please tell me how to fix it cause I have no other phone to call the company for support all I have is my computer and I...


Your prepaid service may have been disabled for one or more reasons. Although it depends on the country in which you reside and the terms of service provider, here I list some of the reasons.
  1. You might have not recharged the phone according to the terms and conditions of the cell phone companies which binds users to recharge with a certain amount within stipulated time. For example.... xyz is a telecom company which says its customer that minimum Rs. 100 should be consumed within 4 months else the card will be ceased. That means at any how you have to either consume Rs. 100 within the limit or recharge the phone by Rs. 100 on every 4 months to keep the card active.
  2. You might have not responded to the company's call which they make time to time to check whether the card is active or it is in good hand.
  3. There may be toll free number of the company. You can contact them and ask the problem about.

May 31, 2011 | Cell Phones

1 Answer

I have a RS Medical RS-4i Stimulator that stopped working. can you tell me how to restart it. My insurance purchased this machine for me and I no longer have them the machine is 10 years old. They told me...


https://static1.squarespace.com/static/54f4f4aae4b00accfaa5f9b4/t/551340cce4b0beedea4435c0/1427325132294/RS-4i+Plus+IFU.pdf

Setting that is permanent and will never have to be reset. Unplug machine when screen goes blank push the power button and press the channel #4 minus until you get the setting screen. Start with channel #1 and set it to A channel #2 set to B channel #3 set to the number 6 and channel #4 set to A.

Jun 06, 2017 | Health & Beauty

1 Answer

RS 4i won't power up


the 3v battery supports the program info,if it goes bad, u have to send in and they will replace battery and reprogram for u. that is as long as the sysytem is paid for, after one year of service, unit shuts down and u have to call in and they will walk u through entering a code to reset. as long as there is a zero ballance. mine has a bad powerpack 6v 2.1ah 0525 battery, if u have an extra i sure could use. contact is cphlah@yahoo.com. i am in louisiana. thanks

Sep 08, 2009 | Health & Beauty

1 Answer

Ice building up on the internal back wall of AEG SANTO K 9 18 00-4i Integrated fridge. this is meant to be self defrosting. We have not defrosted in 3 years and the build up has happened over the last 6...


Your defroster mechanism inside the unit has gone out. What this is is a long tube that heats up to maintain the ice from forming as you say. It possibly went out at the last defrost cycle as you had stated. this defrost cycle is done by the fridge on its own as the has been designed to do. I would suggeest having the unit serviced by a tech since you have an intergrated system. Good Luck on your Repairs


Dave

Aug 31, 2009 | Refrigerators

1 Answer

Is there any reset code for RS-4i stimulator?


If "you got your stimulator" with a prescription and own it just call RS Medical & they'll reset you for free on the phone. That's what I did. No problem. Then a month ago I dropped & broke my unit so I thought I'd buy another on the internet since I'd paid RS over $4,000 on my orig machine & some supplies, and could find them cheaper on ebay etc. Then I called RS for a reset, they asked for the serial number, and I learned that not everyone OWNS "their machines". The one I'd just bought was a never returned LEASED item that many return demand letters had been sent out on. In other words, I was sold STOLEN PROPERTY. RS Medical wanted their unit back. I wanted my money back from the seller. Paypal WAS NO HELP. The replacement I bought has been flagged as stolen & will never be reset ---- don't get yourselves in this crappy position people, it's not worth it. Go to a Dr., get a prescription for the device, hope your insurance will pay a good chunk of it, and MAKE SURE IF YOU'RE BUYING ONE ON THE INTERNET YOU ASK FOR A SERIAL NUMBER OF THE MACHINE & CALL RS FIRST TO SEE IF THE SELLER REALLY OWNS IT (& this is hard enough working around the HIPPA stuff..), but they'll tell you if it's THE PROPERTY OF RS MEDICAL!!!

Jun 23, 2009 | Health & Beauty

1 Answer

Need reset codes to rs-4i stimulator


it will,nt turn on need a code when it does turn on to use it

Feb 24, 2009 | Computers & Internet

3 Answers

I have a RS Medical RS-4i stimulator , how do I reset it ?


This is the code that I was given about 7+ years ago to reset our RS Medical RS-4i Stimulator and it worked fine.

Turn unit on & press ch. 4. Then you press ch. 1 until it shows a "F". Then ch. 2 until it shows a "7", ch. 3 until it shows a "B", & ch. 4 until it shows a "A".

Hope this helps.

Jan 18, 2009 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

4,040 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...