I am running windows 6 and vista. what do I need to download to have my National DC2-456 digiaal mcroscope up and running?.

The software for National Optical DC2 is provide by Motic. According to motic's website "images plus" is not yet available for Window 7 based operating systems: http://www.motic.com/ProductDetail.aspx?r=NA&lang=en&cid=145&pid=48. However Motic does mention that there are some of their camera's that are compadiable with windows Vista and 7. Here is a link to determine if your camera is compadiable with Windows 7: http://www.motic.com/ProductDetail.aspx?r=NA&lang=en&cid=163&pid=941

Download the latest and greatest version of the Adobe Flash Player. After it finishes installing, you go to a site featuring Flash content and are greeted with a message notifying you that you need to install Flash Player, but didn't you just do that? To properly update your Flash Player, you need to run the installation as Administrator. Follow these steps to properly install Adobe Flash Player:


For Vista (32 bit):

1. Open Computer.

2. Navigate to C:\Windows\System32\.

3. Scroll down and open the Macromed directory.

4. Open the Flash directory.

5. Right-click FlashUtil9b.

6. Select Run as Administrator.

7. When the UAC prompt appears, select Continue.

8. Follow the Flash Player installation wizard.

For Vista (64 bit):

1. Open Computer.

2. Navigate to C:\Windows\SysWOW64\.

3. Scroll down and open the Macromed directory.

4. Open the Flash directory.

5. Right-click FlashUtil9b.

6. Select Run as Administrator.

7. When the UAC prompt appears, select Continue.

8. Follow the Flash Player installation wizard.

Once the wizard completes, Flash Player has been properly installed and will now function properly.

Thank you for using FixYa
Don't forget to vote thanks!!

If you have Windows Mail, you no doubt are running Windows Vista. Sorry, but Outlook Express is not supported in Vista. You are stuck with Windows Mail or a third-party mail client. FYI, I use Thunderbird and am quite satisfied. It works with Windows XP through Windows 7

How to correct a Load MPEG VIO Driver Error in Windows Vista.

If you are experiencing this issue with Windows Vista, please follow these directions:

Note: These steps are only for Windows Vista. If you are experiencing the problem on Windows XP, please see the directions found here: KB Article 1469

1. Uninstall Photo Explosion 3.0.
2. Reinstall Photo Explosion 3.0.
3. Restart the computer.
4. Download the Vista update for Photo Explosion 3.0 from the following link:

http://www.novadevelopment.com/Support/Updates.aspx

Note: Please make sure you download the correct one for your version of Photo Explosion 3.0. If you have the Deluxe version, download the Deluxe update. If you have the regular version, download the non-Deluxe update.
5. Save the update to an easily accessible location, such as your Desktop.
6. Once downloaded, go to where the update was saved and double-click the update.
7. After installing the update, you should no longer experience this problem.

Note: It is extremely important that you do not run Photo Explosion until you have restarted the computer and installed the update. If you run the program before installing the update, you will need to start the steps over from the beginning.
This comes directly from the Nova FAQs. Hope this helps!

Vista style for all operating systems.

Choose by category at National Geographic.

Choose this link if you would like to browse 3D.



Enjoy....................Nate P.

CreataCard Platinum 6 is designed to be used with Windows 95/98/2000/Me or NT 4 and XP, therefore in order to run it in Vista I'd suggest to run your program using Compatinity Mode --> Go to your Desktop --> Right click on the program icon--> Properties-->Compatibility--> select one of the versions above

you can go to microsoft.com and look up vista. there are tons of writeup, you can also do a search on the web. get some horror stories form some of the people.

http://www.tascam.com/i-406-232-128-6-1DFAFF45.zip

This is a driver for Windows Vista/XP 32-bit system and I found it on this page:

http://www.tascam.com/products/us-144;9,15,70,19.html

That page includes manuals, firmware (the program embedded on the 144), etc.

How To Make Vista Bootable DVD with WIM Downloaded Files If you have purchased Windows Vista online and taken the delivery of the latest operating system via web download from Windows Marketplace, you would ends up with a few downloads with .wim and .exe file extensions. Rather than paying additional shipping and handling charges, you can burn or create a bootable ISO DVD image from downloaded Vista files with the following trick, where the .iso image can subsequently write to a DVD. The DVD created will be the typical 32-bit Windows Vista DVD that available in retail channel, and can be used to clean install.

How to make a bootable Windows Vista ISO DVD media

1. Put all 3 downloaded files (namely install.wim, boot.wim and an executable X13-49120.exe) in the same folder (for this tutorial, let’s assume the files are put on C:\ else you need to modify the path accordingly).
2. Run the X13-49120.exe executable. Windows Vista Setup Preparation will create a new folder “Vista” inside the folder and will populate the folder with all necessary Vista setup files which takes up about 2.52 GB disk space.
3. Exit from the Install Windows screen.
4. Download CDimage 2.52
5. Extract CDimage from CDimage.zip to the C:\ root directory.
6. Open a command prompt shell, and run the following command:

cdimage.exe -lVISTA_EN_DVD -m -u2 -bC:\Vista\boot\etfsboot.com C:\Vista\ C:\Vistax86.iso

Bootable Windows Vista x86 DVD ISO image in UDF format will be created as vistax86.iso in C:\ or any folder you specified above.
7. Burn the newly create ISO with a CD/DVD burning software such as Nero or Alcohol 120%. Try to burn at low speed (i.e. 4X) and turn on verification to ensure that the DVD creation is fine.

Create a Windows Vista ISO image and DVD with Oscdimg

Another possible way to create a bootable Vista ISO and DVD is by using Oscdimg CD-ROM and DVD-ROM Premastering Utility, available via WinPE (Windows Preinstallation Environment) via Business Desktop Deployment 2007 or Windows Automated Installation Kit (AIK)

1. Complete step 1 - 3 as above.
2. In the command prompt window, run the following command:

oscdimg -bC:\Vista\boot\etfsboot.com -h -u2 -m -lVISTA_EN_DVD C:\Vista\ C:\VistaDVD.iso

A VistaDVD.iso UDF DVD image will be created and can be used to boot the computer from DVD to install Vista.
3. Burn the ISO image file by using last step above.