Question about Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

4 Answers

Sceptre LCD - no display

My Sceptre LCD X9G-Komodo IV is no longer worked as usual, the screen stopped displaying. If I press the button OFF and ON again, the monitor will display information for about 1 second and after that the screen is blanked/blacked out even the power is still ON (green). Could you please help me to resolve this problem? Thanks the screen stopped displaying. If I press the button OFF and ON again,the monitor will display information for about 1 second and after that the screen is blanked/blacked out even the power is still ON (green).

Posted by on

  • mickey1957 Jul 19, 2008

    Same damn problem..Piece of junk I Deduce

  • pstephens1 Jul 20, 2008

    I have the exact same problem. The monitor comes on for 1 second the goes black. I have taken it apart and I don't see anything wrong with the capacitors.

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Sceptre Master
  • 848 Answers

Sceptre LCD - no display? This trouble maybe power supply or inverter boards is defective.
first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts
if you have any question,please let us know email:service@wisiny.com.thanks,we sincerely hope we can help you!
you can also check this boards whether suit you:
Sceptre LM004 Power Supply Backlight Inverter for X9G KOMODO

Posted on Mar 22, 2015

I have the same problem and wouldn't buy another scepture at quarter the price.

Posted on Sep 21, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have same problem... just went off warranty and they won't cover it.. they want $100 for repair plus $35 shipping plus I have to pay to ship it to them... For $179 I can buy a new 19" with 3 year warranty...I wouldn't buy another Sceptre at half the price

Posted on Jul 29, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I did sent it to them for the $135.got it back and it works.If it happens again I will slam them like I did roto zip.I got another motor from them but it was a piece of junk too.

Posted on Sep 21, 2008

2 Suggested Answers

  • 1 Answer

SOURCE: Sceptre X9G Komodo IV

I have a 19" Sceptre Comodo display. After 3 years it got the problem everybody complains about. Took it apart yesterday.

There are 4 capacitors in a row on the power supply board (it has a socket for the power cord and is covered by a metal shield. The caps are barrel-like things standing upright on the side opposite to the power cord socket.) Two of them are 470 uFx 25 V, they are next to each other. In my case, one of them popped up and another one was bloated. I pulled out the power supply board (make sure you unplug the power cord and press the power button do discharge the high voltage caps before messing with your monitor) after disconnecting all sockets (mark'em!). I assume that you have new caps handy (I paid $2.10 for a pair at a local electronics store), they must have the same capacity and voltage rating. Now grab a soldering iron, remove old caps, and put new ones in. You must observe polarity! (Usually "minus" pin is labeled on the cap's side. Mark down "minus" and "plus" pins location of old caps and put the new caps in exactly the same way! Otherwise, you can blow the caps.) If you are not used to work with a soldering iron, hire somebody or buy a new monitor. Check the quality of the work (no shorts, solid contacts, etc), assemble the monitor back and may be it will work (did for me). If it does, you put one monitor less into the city dumpster, be proud to get a working monitor for less than $5, and force you mother-in-law to take this shiny new replacement display she just bought back to the store.

Of course I do not guarantee that my procedure will work for and you can use it at your own risk only (i.e. I am not liable for any damages).



Posted on Sep 09, 2008

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Same problem here


My Sceptre Komodo 19 would turn on for less than a second than turn off. Eventually, I could get it to stay up. But after a month, I couldn't get it to stay on anymore.
I found the solution on this website. There are some bad capacitors... 4 of them for about $2 worth. I replaced all four and the monitor works fine again. They are soldered in. They are polarized; they need to be installed the right way. The white stripe goes towards the “wall”.
2 are 470uf 25v and 2 are 1200uf 10v.
I ordered mine for about $10 with shipping from Mouser.com
661-EKZE250ETD471MJ1 and 647-UHE1A122MPD
0cd9231.jpg
a7d4c35.jpg

Oct 04, 2009 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

2 Answers

Same Flashing Problem


My Sceptre Komodo 19 would turn on for less than a second than turn off. Eventually, I could get it to stay up. But after a month, I couldn't get it to stay on anymore.
I found the solution on this website. There are some bad capacitors... 4 of them for about $2 worth. I replaced all four and the monitor works fine again. They are soldered in. They are polarized; they need to be installed the right way. The white stripe goes towards the “wall”.
2 are 470uf 25v and 2 are 1200uf 10v.
I ordered mine for about $10 with shipping from Mouser.com
661-EKZE250ETD471MJ1 and 647-UHE1A122MPD

44cf31e.jpg5bcc2c5.jpg

Jul 06, 2008 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

2 Answers

Black screen


could it be a dry solder around the inverter transformer , try to re solder all suspicious points , that should fix the problem, hope it helps , AJ

Jun 04, 2008 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

4 Answers

Sceptre X9G Komodo IV 19 in


check out any dry solder or burnt and re solder it , hope it helps AJ

May 03, 2008 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

2 Answers

Sceptre DCLCD19+ MONITOR WHITE SCREEN


To me it sounds like the bulb is having a problem with powering up. It may be an issue with the power adaptor or the outlet it is plugged into. Have you tried to plug it in, in other outlets?

Dec 20, 2007 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

7 Answers

Sceptre X9G Komodo IV


I have a 19" Sceptre Comodo display. After 3 years it got the problem everybody complains about. Took it apart yesterday.

There are 4 capacitors in a row on the power supply board (it has a socket for the power cord and is covered by a metal shield. The caps are barrel-like things standing upright on the side opposite to the power cord socket.) Two of them are 470 uFx 25 V, they are next to each other. In my case, one of them popped up and another one was bloated. I pulled out the power supply board (make sure you unplug the power cord and press the power button do discharge the high voltage caps before messing with your monitor) after disconnecting all sockets (mark'em!). I assume that you have new caps handy (I paid $2.10 for a pair at a local electronics store), they must have the same capacity and voltage rating. Now grab a soldering iron, remove old caps, and put new ones in. You must observe polarity! (Usually "minus" pin is labeled on the cap's side. Mark down "minus" and "plus" pins location of old caps and put the new caps in exactly the same way! Otherwise, you can blow the caps.) If you are not used to work with a soldering iron, hire somebody or buy a new monitor. Check the quality of the work (no shorts, solid contacts, etc), assemble the monitor back and may be it will work (did for me). If it does, you put one monitor less into the city dumpster, be proud to get a working monitor for less than $5, and force you mother-in-law to take this shiny new replacement display she just bought back to the store.

Of course I do not guarantee that my procedure will work for and you can use it at your own risk only (i.e. I am not liable for any damages).



Nov 15, 2007 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

2 Answers

Sceptre X9G Komodo IV 19" Monitor


Hi dgp1952, Check with www.lcdrepair.net if you want a repair. Something is wrong with your backlight or the circuit supplying power to it. If your technically endowed, you may want to open the monitor case and clean the dust and lint from around the circuits using a Small paint brush to sweep away any built up dust. Dust can cause the circuitry to heat up faster and put the power supply into Clamp mode. Clamp mode will turn the supply off to certain circuits which may be the reason your display is going black after 5 minutes.

Oct 09, 2007 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

2 Answers

Sceptre X9G-Komodo IV


I recently came accross one of these monitors (Planar PE191M) with the identical issue. The resolution was to replace the two 470ufd 25V capacitors that are located on the main power board. The main power board also contains the audio circuit and more importantly the inverter circuit that drives the CCFL backlighting. The suspect caps were identified using an ESR meter; if you happen to have one of these meters you can confirm this is the issue with your unit(s), alternatively you can just replace the two capacitors and see if it resolves your issue. Hope this info helps someone out there.

Sep 05, 2007 | Sceptre X9G Komodo IV 19" Flat Panel LCD...

Not finding what you are looking for?
Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor Logo

431 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sceptre Computers & Internet Experts

Robert Veldman
Robert Veldman

Level 3 Expert

373 Answers

Ben Slimene Aymen
Ben Slimene Aymen

Level 2 Expert

109 Answers

Are you a Sceptre Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...