Question about Kodak EASYSHARE 5300 All-In-One InkJet Printer

2 Answers

Printer problems i have a koday 5300 all in one printer and i cannot get it to print anything black...i have went and even bought new cartridges, one for black and one for color...the only thing that will print is the color...what is wrong, or what can i do to fix this>? thx...charlene

Posted by on

  • bigredted Jul 14, 2008

    same problem changed cartridges no luck color prints great what is going on?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 96 Answers

K...Trust the solution. Try these steps. Open the printer, remove the ink and remove the printhead (See User's guide). Reseat the printhead and the ink cartridges. The printer will come up with an error message that requires calibration. Do the calibration and scan the sheet that prints right after by pushing the start button. In the menu options, clean the printhead. Do one basic and one deep. Print a demo sheet (another menu option) to see if the quality has gotten better. If it has not call Kodak AiO Tech support. You will need a replacement printhead.

Posted on Jul 14, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Sorry for your frustrations. Throw the piece of junk away and save yourself from recurring aggrevations.

Posted on Jul 13, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kodak 5300 All In One Printer. Black ink quit printing.


Hi there.
It could be the chip in the cartridge... faulty for printing?
Settings in the printing process?
Iceman.

Nov 10, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Not printing black


Hi

1. Make sure that you have removed the plastic cover from the cartridge nozzle .
2. check if your black ink cartridge is full - put the nuzzle on the tip of you finger if it leaves ink drop then it is full and should print ok , if it didn't leave ink on your finger then it is dry and you should buy new cartridge .

hope it helps

Jul 20, 2009 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak easyshare 5300


Call technical support or work through the pages on their support page...you need a new print head. They will ship one out to you.

Nov 18, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodak easyshare 5300


try to remove and install again the ink cartridges and after that perform printhead cleaning again if still prints the same call kodak aio hotline 1 800 421 6699 you might need a replacement printhead..

Nov 14, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Kodok easyshare 5300 printer/scanner


Print out a demo sheet. Press copy and photo at the same time. If the black isn't printing on this demo sheet, (the eyes on the two kids at the top are all white), you need a new printhead. Your's is probably clogged. contact kodak tech support. 18004216699. Option 1

Oct 10, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Black inkwon't print


pictures are not clear even after installing new ink cartridge and cleaning print head

Oct 04, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

4 Answers

Printer kodak easyshare 5300


You will need a new printhead call 1.800.421.6699 to request one. Please rate. Thanks!

Oct 04, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Koday Easyshare 5300 color printin problems


check first the type of paper that you are using if it is compatible in your printer
if you are connected online, try first to update your firmware, you can do that by downloading it in kodak website www.kodak.com/go/drivers, the latest version is 71.650837, then install it in your computer.
after the upgrade restart your printer, then try to calibrate then deep clean of your printhead then print demo page. if it still producing the same result or problem.

contact AIO Tech Support 1-800-421-6699

by Ebrown

Sep 24, 2008 | Kodak EASYSHARE 5300 All-In-One InkJet...

1 Answer

Ink cartridge replacement


I had the same problem, and after scouring around online for a few days, I learned that this is one of the biggest gripes about this printer. Basically, you're out of luck unless you replace EVERYTHING, even though you only want to print black (nuts, isn't it?). So I went out and bought all new color cartridges, and it STILL won't print. I think it's just a bad printer all around. :(

Sep 07, 2008 | Epson CX8400 All-In-One InkJet Printer

Not finding what you are looking for?
Kodak EASYSHARE 5300 All-In-One InkJet Printer Logo

185 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Printers & Copiers Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Michel Smith

Level 3 Expert

1218 Answers

Sajid Najmi
Sajid Najmi

Level 1 Expert

31 Answers

Are you a Kodak Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...