Question about Phase Linear UDV9010 Car DVD Player

2 Answers

Phase linear uv7i

Hello, I don't have the remote to this product and I just got it installed and it gives me the same thing it gives everyone. something emergency brake , I can't see the dvd. can tou please help. do i really need a remote control or where can i get one

Posted by on

  • postaljenk Nov 03, 2008

    i need a new remote also

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I took a simple toggle switch and hooked the parking brake wire to one of the leads and then a ground wire to any good ground location. When you put in the DVD it will read the safety message then just flip the toggle switch one way for 3-5 seconds then flip it back and it will work, if not flip the switch the other way and wait 3-5 seconds and it will work. It makes the radio think that the emergency brake has been set and you can watch it anytime. You just have to flip the switch each time you watch a new DVD.

Posted on Jan 05, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Install a switch with one end going to ground and the other to the pink barking brake wire off the deck switch it to on"ground" for 3 seconds then off"no ground" for three seconds do this 3 times and then leaving it in the ground position and it will work but the car must be in park when you do this

Posted on Sep 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Phase Linear UV7il accept only some CD's


the head unit is not reading due to incompatibility with thebrand or type of disck

Dec 29, 2009 | Car Audio & Video

2 Answers

My UV7i just opens and closes as it pleases


Some loose connection on the LCD panel to the device, or inside the LCD, by a certain vibration the monitor seems to get like a christmas lights one on/off..

you better bring it to a certain service technician to provide through test on your device.

thanks

Feb 23, 2008 | Phase Linear UDV9010 Car DVD Player

1 Answer

How to assemble the phase UV7i dvd/cd player


can u give me some info about how to identify the power supply wire to a car cd player

Jun 27, 2009 | Phase Linear UDV9010 Car DVD Player

1 Answer

I have the phase linear UV7i I was trying to put in the overide


reset it,try with out the remote and change the remote battery,put in dvd wait for the blue screen,then press stop 2x then enter 1264 then,if you have a up,down,l/r control on the deck press down 1x then press play,you dont even have to use the ground wire then go to the rest, when you can see the menu,i dont know if it will work but u can give it a try

Jun 18, 2009 | Phase Linear UDV9010 Car DVD Player

1 Answer

How can i watch dvd while i drive?


its very sample. you will insert a DVD and everything will be start and going automaticly.

May 29, 2009 | Phase Linear UDV9010 Car DVD Player

1 Answer

Bad disk


Wow! That's a first. I used to sell both the Jensen AND Phase Linear versions and never a problem. It sounds like a bad unit. You say it plays NOTHING? No CD's OR DVD's that are the factor made?
The only thing I hav up my sleeve is to do a reset on the unit. If it has a button (I don't think it does frm what I remember) use it first, then with the unit ON, unplug the poer plug, wait a few, then plug back in and see.

Sorry I have no more tricks foir that,

Larry T
Winona Lake, IN
http://www.cybersoundsaudio.com/cybersounds/vehiclepics.html

Jan 26, 2009 | Jensen VM9510 Car DVD Player

2 Answers

Wiring uv7i


you can use the deck without a remote, the only thing is you cant go into the system without the codes. there is a sequence code you must enter to disable it. there are a couple of videos on youtube but none for the uv7i. trust me, i 've been there on and off since the summertime. i am not sure if the sequence works due to me not hooking it up to external monitors but you can disable the blue screen with a on/off switch...only problem is, you'll have to do it everytime you turn your car on. here's what you do....
buy a on/off switch(radio shack $3)
hook the pink wire to one part of the switch-the other to the negative ground
put a dvd in(from what i hear, it must be store brought), wait unntil the blue screen comes up
turn the switch off...wait two seconds/turn on...wait two seconds/turn off...wait two seconds and turn back on. the blue screen is gone and video is on. ifyou still need the diagram, i'll scan mine for you.

Nov 09, 2008 | Phase Linear UDV9010 Car DVD Player

1 Answer

Car Video Players


The emergency brake sequence is simple. First apply your emergency brake, or engage your toggle switch on keep it on for 3-5 seconds then release or disengage for 3-5 seconds then reengage and a couple of seconds later you have vidieo. ENJOY.

Oct 14, 2008 | Car Audio & Video

Not finding what you are looking for?
Phase Linear UDV9010 Car DVD Player Logo

Related Topics:

203 people viewed this question

Ask a Question

Usually answered in minutes!

Top Phase Linear Car Audio & Video Experts

meteshadow

Level 3 Expert

489 Answers

Steven Miles
Steven Miles

Level 1 Expert

34 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Are you a Phase Linear Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...