Question about Audio & Video Receivers

1 Answer

No sound coming from my speakers.Help! - Audio & Video Receivers

Posted by on

  • Dave DeGain
    Dave DeGain May 11, 2010

    And how do you expect anybody to help you if we have no idea what type of equipment you are using or what you may have tried to get the problem solved?



    The make and model is a good place to start. There is no universal answer to "no sound coming from my speakers", except maybe, turn up the volume.



    It would also help if I knew what type of things are lit up in the display. Anything you don't normally see? Like the "Tape Monitor" or "Mute"?



    I would be happy to help you more, but there is just not enough information to give you a good answer.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 624 Answers

Do you still have the problem with your receiver? If so, please provide more detail as I requested before and I may be able to help you.

Posted on Oct 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No Sound in Right Front Speaker- Denon AVR-1508


hi there,

have you check the system settings for each of the speaker..? should be set and balance all output of the speaker

`jack

May 24, 2008 | Audio & Video Receivers

1 Answer

No surround sound


firstly Jessica you will need either a cd or some form of media that is recorded in surround sound then make sure all wiring is in it's right sockets then while your "cd" is playing configure the amplifier. I hope this will be of some help goodluck.

Nov 26, 2013 | Yamaha RX-V373 5.1 AV Home Theater...

2 Answers

7.1 speaker setup: no sound coming from right front/surr speakers


Solution to having no sound coming from certain speakers in a 7.1 speaker setup for TX-SR606 receiver when playing a DVD.

Review the cable setup for the DVD player since it was identified as the source of the problem. Best to unplug and plug in the cables to ensure they contact the back of the receiver's RCA jacks. Redo the microphone setup for Audyssey 2EQ calibration. A good chance that it is the cable that may have caused the malfunction and loss of sound from the speakers. The cables can come loose during setup and not plugged all the way to the back of the RCA jacks or a defective cable causing signal loss.

Apr 15, 2009 | Onkyo TX-SR606 Receiver

1 Answer

Kenwood VR6070 speaker/amp problems


unit needs repair. Look at the b speakers. Conect a speaker or two to the B position. If you have no sound than your surrond sound is ok and the unit is bad. Sound comes directly into the b speaker and not threw the surrond system. My 6070 has a cold start up problem. no sound. time to purchase a new one. to costly to repair.

Dec 30, 2008 | Kenwood VR-6070 Receiver

1 Answer

No sound coming out of Center, left and right front speakers


make sure you didnt turn off speaker set A on the reciever. cause from what i can tell from the manual you may have hit a button to turn them off. now on your reciever look below the power button on the unit itself. below that is a speaker A/B push the A button to make sure its on or the B depending how your speakers are rigged. if this isnt the problem let me know and i can help you with another solution -Nate

Jun 14, 2008 | Yamaha RX-V800 Receiver

1 Answer

Volume on surround sound speakers not working. Sound coming out of speakers but volume when turned to maximum is very low. Please help.


Most receivers you can adjust the different chanel levels. If you refer to the manual on adjusting chanel volumes in surround sound mode.

May 26, 2008 | Audio & Video Receivers

1 Answer

No sound....


are u on right input ?thats matched your input dvd ect on menu of unit A ch speakers on only ? what model sterio u have and speakers />

Jan 22, 2008 | Audio & Video Receivers

1 Answer

Cant get rear speakers to Work AVR 745 7.2 Surround!!!


Another way to solve this rear speakers problems is to go to the equalizer and have the system recognizes the sound coming out of all speakers. The AVR 745 comes with a microphone on the stick, using that to run the manual equalizer. It is the manual equalizer will set the rear speakers.

Dec 29, 2007 | Harman Multimedia AVR 745 Receiver

1 Answer

Sound not coming from left side surround sound speaker or my right side front speaker


it is highly likely that you're TV is outputting mono sound, hence the left channel only. check your physical connections to the TV and the balance / channel volume on the television as well.

May 01, 2007 | Onkyo HTR500 Receiver

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68301 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...