Question about Projection Televisions

1 Answer

Plasma model ciwp4206 made by funai (inside samsung plasma)doesnt turn on, light blinks 9 times then nothing. thanks in advance

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Remove diodes D2500 and D2501 (which are only protection, making the TV goes to standby instead of powering on) from the main power supply board. If the light does turn to a green one instead of going back to standby and you have the sound but no image, it should be the same problem as I had, which seems to be frequent with these Funai piece of junk.

You need to replace the ceramic capacitor C2258 on the main power supply board, it should be the faulty part as it was on mine. This capacitor is near an aluminium heatsink and was slightly burnt.

Here are the specs of that part from the service manual:
C2258 CAP CERAMIC HV 3300pF 2KV R K

As I didn't find a capacitor with these specs, I put two capacitors in parallel and it works fine now. Good luck!

Posted on Apr 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Samsung Plasma tv (PN59D8000FFXZA) that after my neighbors house was struck by lightning it won't turn on. What steps should I take for diagnosing the root issue?


When it get hit with any surge usually the main Board is gone, to replace it and hope nothing else is wrong, you can get a 4k LED for probably same price


Amazon com 4k smart tv 50 inch Electronics

Jun 17, 2016 | Samsung Projection Televisions

1 Answer

Samsung model#PN51E46OAIF....TV -one year old won't turn on. Red power light blinks one time every ten seconds


If this is a plasma tv--and the model # sounds like it is it may have lost a sustain board a VERY common problem in these.

May 05, 2014 | Panasonic Projection Televisions

1 Answer

I have a Panasonic HDTV Projection Monitor. PT-50DL54J. When I turn it on, it flashes green on the power button, I can hear the fan, then it stops and flashes a red light 9 times forever. Any tips? Thanks


These blinks to standby light are fault indications. You can get an idea about the faulty circuit section inside it, by these blinks, called blinking codes. If you wish to know more about the blinking codes, http://electronicshelponline.blogspot.com/ check this link. It has details about these blinking codes, to many brand TVs including many models of Panasonic. Pull up older posts there, either by its left side bar, or see it in Timslide option.

Jun 24, 2013 | Projection Televisions

1 Answer

TV does not turn on...stand by light blinks 9 times and then stops and starts again. TV is only 4 years old


Without knowing the model or type of set I'm assuning it is a dlp . if so change the lamp.

Apr 23, 2009 | Projection Televisions

3 Answers

9 red blinks


Can you verify that its 9 blinks? There is no error code in that set for 9. also please verify that its a kdsr50xbr1

Thanks
Tim

Jun 29, 2008 | Sony KDS-R50XBR1 50" HDTV

1 Answer

Red light blinks 10 times then 9 but won't turn on.


Can you confirm that the model number of your set is KP46WT520 as I dont want to give you the wrong information.

Jun 24, 2008 | Sony KP-46WT520 46" Rear Projection...

1 Answer

Blinking Power Light 9 Times Phillips 60PP920299


go to this link they may have your service manual for your tv they list them by chassis numbers so if you don't see it leave them an e-mail with your model number and they are very good about getting back with you
http://servicemanuals.vstore.ca/

May 09, 2008 | Philips 60PP9202 60" Rear Projection...

2 Answers

When i press power nothing happens except the standby light just blinks and doesnt stop.


What is the make and model number of your set? I can help you but I need that info, So I know where to start.

Jan 23, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

637 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...