Question about Bosch Classixx WFC 2465 Front Load Washer

1 Answer

Not spinning My machine works fine right up to the bit where it i supposed to spin, then it does not do it. the spin light does flash though if that helps. About 2 years old, no previous problems Any help appreciated.

Posted by on

  • pcpete Aug 20, 2008

    I have the same problem. I starts all right then gets stuck on rinse cycle but will rinse when you manually switch to rinse on the dial. But mine is wfo2466gb?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I found my Classixx 1200 express with a flashing spin light, the water wasn't up in the drum, so I moved the selector to rinse, and pressed start, pump was noisy but worked, I could hear water going into the drain, thinking I'd got a blockage in thye pump, I drained machine using small hose and inspected the pump orifice at the front of the machine (towel handy to catch spillage.
No obvious blockage and the pump could be turned by hand, tried rinse again with water feed turned off, (otherwise it pumps for a while and then lets water in to rinse - which comes out the open pump housing!) I could see the pump impeller spinning but also sticking, its was also noisy.
Solution - new pump, according to my local spares shop, the pump is available as either motor & impeller (back half), or complete with black housing that the pipes fit to, to get the front cover off, and to remove the pump, you need a "star" screwdriver or key, and a pair of pliers to undo the hose clips - have a bowl ready to catch the water, and make sure the machine's unplugged before you start!

Posted on Jan 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My washing machine won't spin when in a wash cycle but will spin on a spin cycle


???? ITS NOT SUPPOSE TO SPIN WHILE WASHING ? DO U MEAN ITS NOT AGITATING? THEN LOOK AT UR PRESSURE SWITCH AND UR CAM DOGS. MOTOR COUPLER OR BELT. NEXT UR CLUTCH BRAKE ASSEMBLY MAY BE BAD
washing-machine-spin-when-in-wash-cycle-dn3wi03dqy3vjnwbm4uf5us1-3-0.jpg

washing-machine-spin-when-in-wash-cycle-dn3wi03dqy3vjnwbm4uf5us1-3-2.jpg

washing-machine-spin-when-in-wash-cycle-dn3wi03dqy3vjnwbm4uf5us1-3-5.jpg

washing-machine-spin-when-in-wash-cycle-dn3wi03dqy3vjnwbm4uf5us1-3-9.jpg

washing-machine-spin-when-in-wash-cycle-dn3wi03dqy3vjnwbm4uf5us1-3-14.jpg

washing-machine-spin-when-in-wash-cycle-dn3wi03dqy3vjnwbm4uf5us1-3-20.jpg

washing-machine-spin-when-in-wash-cycle-dn3wi03dqy3vjnwbm4uf5us1-3-27.jpg

washing-machine-spin-when-in-wash-cycle-dn3wi03dqy3vjnwbm4uf5us1-3-35.jpg

Jun 09, 2015 | Hotpoint WF430 Front Load Washer

1 Answer

My Hotpoint WML560 won't run a full cycle.


Is there a no spin button that has been pressed. Also some delicate cycles have no spin as part of the program.

Dec 14, 2014 | Hotpoint Washing Machines

2 Answers

Washing machine does not work on any program though stop light and spin speed light are flashing t


The stop light and the spin light flashing are acting as an error code. Have you tried to google what this means? here is a link to candy error codes for that machine...
http://www.ukwhitegoods.co.uk/help/fix-it-yourself/fault-codes/laundry-fault-codes/3319-candy-grando-washing-machine-series-fault-codes.html

hope that helps

Jan 15, 2014 | Candy Washing Machines

2 Answers

I have a simpson EZIset 750 7.5kg washing machine, model # 22s750m When the machine fills up and start it cycle everything is fine until it comes time to do the first drain and spin, the lid lock light...


Hi There, I have the same machine with the same problem. I replaced the lid lock switch with the new upgrade kit, though you might need a tec to install it! approx $100.00

Jan 02, 2011 | Washing Machines

1 Answer

When I start my LG WM2101HW washer, the spin light


sounds like a clitch under warrenty would call them out so you dont void warwrnty

Dec 06, 2009 | Washing Machines

2 Answers

Washing machine won't drain water nor spin


You have either a clog in your water pump or it has broke.Most the time it can be fixed by removing the 2 hoses attached and remove all debris.Then make sure it is still working.This will correct the light flashing problem at the same time. Please rate this ~!!!

Sep 09, 2008 | Washing Machines

1 Answer

Haier XQG50-11 spin and dryer do not work


Same thing happened to my unit. It turned out to be the no spin switch which I never used anyway.

The switch had gone bad even though it was never used it. It was broken in the no spin state. The connectors on mine were a bit chared looking.

Take the top cover off the unit and remove the two wires from the no spin switch. Place a jumper between these two wires bypassing the switch or replace the switch.

In the no spin cycle the unit will not spin or dry.

I bypassed my switch and the unit runs perfect again.


.

















Mar 15, 2008 | Washing Machines

1 Answer

Washing machine wont spin


Try and help it to spin in the spin mode.. if it moves.. sounds like a clutch problem ..IF NOT... you may have something like nail, screw ect... binding the spin tub from moving.. get a flash lite do some close checking inside the spin tub

Aug 28, 2007 | Whirlpool Ultimate Care II LSQ9564J Top...

Not finding what you are looking for?
Bosch Classixx WFC 2465 Front Load Washer Logo

296 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Tim Whalen

Level 3 Expert

3056 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...