Washing Machine will not spin , also looking for Manual

Check the drain pipe. If there is a block or bent, release it. Look for the floss tray to clear it. Then look for the motherboard.

i think there is some problem in wiring of spin and drain. thats y it works only for washing. current stops after washing. or otherwise click below link and check the manual may be its timer problem

http://www.askmehelpdesk.com/appliances/kenmore-washing-machine-70-series-repair-manual-479481.html

http://www.askmehelpdesk.com/appliances/kenmore-series-70-washer-manual-445690.html

go to the manufactures website and download the user manual and look in the trouble shooting guide eric

Hi,

Problems with a washing machine not spinning or not draining are often inter related..

If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin


If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing machine not draining and or not spinning


heatman101

Hi,
If you are having a problem with your top load washer then check out this tip...

Washing Machine does not Pump or Spin
http://www.fixya.com/support/r4617986-washing_machine_not_pump_or_spin

If you are having problems with your front load washing machine then checkout this tip...

Front Load Washing Machine not draining and or not spinning
http://www.fixya.com/support/r4784376-front_load_washing_machine_not_draining

heatman101

need make and model .
but most machine's do have spin only programme. so turn your machine to this position look for the spin programme after sythetic this is normally slower .and turn on.Iif you can't find spin please let us have make and model .

Did you remove the drum protecion ? (a kind of 2 or 4 big screws that attach the drum to the body of the machine to protect it during transportation - new machines ships like this from factory)
If you continue to use it without removing those attachements, not only it is dangerous but also you will damage it.
Have a look on the installation manual, the re should be discribed how to remove them.
Hope this helps.

hi,
looks like there is some friction between the main and outer tub of your machine. there is generally a mechanism for smooth spinning of the machine in good rpms for wash-spin cycle. this could be because of rust formation, or mud collection. please refer your manual and remove the 3 screws behind the lower front plastic cover, and look for rust formation. scrape the rust and try spinning again.

cheers

You can get the manual here line 20.

http://www.usersmanualguide.com/aeg/washing_machine

Good Luck And Please Rate FixYa!

Possible your outlet filter is blocked, find it and clean out. Look into yr users' manual