Question about Sharp Air Conditioners
1. Power down the air conditioner using the "power" button on the front
2. Unplug the air conditioner from the wall socket.
3. Hold the front panel "power" button down and plug the air
conditioner in. Continue to hold the power button down as the machine
goes through a brief test sequence (fan & compressor each come on
briefly, etc). There is a "beep" sound at the end of the test sequence,
and the machine will be off. At this point, you can release the power
4. Unplug the air conditioner.
5. Plug the air conditioner back in.
6. Congratulations! You should now be able to operate the air
conditioner normally for another 720 hours, but only if you followed
the instructions above EXACTLY.
If you doubt the veracity of this information, or it does not work as
expected, you can get it directly from the source at:
which is the Sharp customer service line. But, you'll need to call
between 7 AM and 7 PM US Central time, and have your model number and
serial number ready.
Posted on Aug 02, 2008
Works every time... Thanks!
Posted on Sep 30, 2012
Tips for a great answer:
Jan 24, 2016 | Air Conditioners
Jul 28, 2008 | Sharp Air Conditioners
Dec 05, 2015 | Air Conditioners
Oct 27, 2015 | Air Conditioners
Sep 08, 2015 | Dometic Rooftop RV Air Conditioner
The E1 code is an error code that appears on the LED temperature display of some digital air conditioners. The error code could mean anything from dirty air filters to a damaged room thermistor, a safety connected to your thermostat that detects room temperature. Troubleshooting the cause of this error code may improve your air conditioner's performance
Sep 15, 2013 | Haier HWR06XC7 Air Conditioner
Jul 23, 2012 | Haier HWR08XC7 Air Conditioner
Aug 11, 2010 | Sharp AF-S85FX Wall/Window Air Conditioner
527 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: