Question about Oster 465 Work Top Blender

1 Answer

The blender coupling on my oster snapped in half. I have the replacement part already I just cannot figure out how to get the broken coupling off the base of the motor. I also got a replacement square drive and slinger because it was so badly rusted it seemed fused to the broken coupling. Thanks so much for your assistance, Sara

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

10-01-2009 Sara - see solution for rlaymon 1-9-08 "Top part of base broke off" by TanyaCS on 1-20-08 - good ideas. I just fixed mine - 2 hour job + half hour to put a new cord in. Like TanyaCS my broken coupling was rusted to shaft - used WD-40 twice and let sit - meanwhile took out motor and removed fan - kept screws and washers in order on workbench (kitchen counter) - the fan hole is "D" shaped - fan end of shaft also "D" shaped - I filed a "flat" on the other side of the factory "flat" (side of 'D' that is straight) - Used big pliers on broken coupling and adjustable wrench on on the "flats" on fan end of the shaft. Broken end came right off. New cord is 18 gauge extension cord capable of at least 6 amps. Cut off the un-needed end. Or order a replacement cord $4 when you order the rubber drive coupling $4, pin with slinger washer $3. Bet you also need new rubber feet - didn't buy for mine - wish I had. Bert

Posted on Oct 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need a replacement jar


  • VillaWare V001-43100 Pro Infinity Blender - Newegg.com www.newegg.com/Product/Product.aspx?Item=N82E16896115006
    • 2/5
    • 2 REVIEWS
    Buy VillaWare V001-43100 Pro Infinity Blender with fast shipping and top-rated customer service.Once you know, you Newegg!
  • Oster® Blender Parts: Find by Model ' Oster® Canada https://www.oster.ca/en_CA/parts-and-accessories/blenders Pick your model and see all of the blender replacement parts available on Oster.ca.
  • VillaWare V001-43100 Pro Infinity Blender Overview - CNET www.cnet.com > Appliances > Small Appliances VillaWare V001-43100 Pro Infinity Blender overview and full product specs on CNET.
  • Model #43100 Need a plastic Jar replacement. Where can I ... www.fixya.com > Forum > Blenders Model #43100 Need a plastic Jar replacement. Where can I find one. Where can I get replacement parts - Blenders question
  • Tilia 1000W Moderno Blender ' TheFactoryDepot thefactorydepot.com/Tilia-1000W-Moderno-Blender/M/B000GFG2W4.htm Tilia 1000W Moderno Blender: MODEL- V001-43100 VENDOR- VILLAWARE FEATURES- Moderno Pro I
  • VillaWare V001-43100 Moderno Pro Infinity Blender - 67 Oz ... www.tigerdirect.com > Appliances - > Blenders - VillaWare V001-43100 Moderno Pro Infinity Blender - 67 Oz, 1000W, Speed Setting Dial Item#: YYD1-V43100 ' Model#: V001-43100
  • Oster Blender/Mixer Parts ' Reliable Parts https://www.reliableparts.ca/catalog/592809 You Are Here: Home > Small Appliances, Parts & Accessories > Oster Blender/Mixer Parts A selection of Oster ... Search by Model of Appliance:
  • Amazon.com: Customer Reviews: VillaWare V001-43100 Pro ... www.amazon.com/VillaWare-V001-43100-Pro-Infinity-Blender/product... Find helpful customer reviews and review ratings for VillaWare V001-43100 Pro Infinity Blender at Amazon.com. Read honest and unbiased product reviews from our users./>
  • Parts for the Blender at VillaWare.com. www.villaware.com/parts/parts-by-model/parts-for-the-villaware... Shop the Parts for the Blender at VillaWare.com. Food, Passion, Life.
  • http://www.bing.com/search?q=blender+Model+43100+parts&qs=n&form=QBRE&pq=blender+model+43100+parts&sc=0-25&sp=-1&sk=&cvid=F6D21CC73446407E940EA71DFB37D5F2

    May 20, 2016 | Blenders

    1 Answer

    I'm after replacement parts for my oster versa 1400w blender preferably in australia .


    when you order parts it goes by model number, from what I can see there are several different model #'s for the Oster Versa,
    BLSTBV-RV0-000 and BLSTVB-000-000.
    try here, type your model # in the search area at the top.
    Oster Blender Parts
    or here,
    Oster blenders lids blenders jars caps at Goodman
    or here, under parts & accessories
    Oster Parts Accessories Oster
    I haven't found any where in Australia to get them, you may just have to get them on line.

    Mar 05, 2015 | Oster Blenders

    1 Answer

    The drive stud on my vitamix 3600 blender sheared off. When screw is replaced it comes unscrewed when the blender is turned on. Does anyone know if the original design included epoxy weld?


    If the motor runs in reverse to an Oster which uses counter clockwise thread then it follows that your thread should not be counter clockwise. If it comes loose when you turn it on surely the thread on the coupling must be faulty because according to your description the action of turning it on can only be to tighten the coupling. Most couplings with a thread that I have seen are counter clockwise so you will probably struggle to find another brand coupling to match.

    Feb 28, 2015 | Vitamix Blenders

    1 Answer

    My oster blender make a couple whirls, something


    hello mam
    this can be repaired please take it to a service center.

    Sep 13, 2009 | Blenders

    1 Answer

    Locking the jar on the base Oster Fusion 600W Blender


    Here is the user manual for the Oster Fusion:
    http://www.osterfusion.com/Manuals/MANUALS/BRLY07-Z00-000_43_29190737.PDF

    It looks like you line up the threads, place the base on, and twist to tighten.

    -Tha Mp3 Doctor

    Mar 19, 2009 | Oster Blenders

    4 Answers

    Replacing rubber drive coupling


    My coupler was split in two, and I couldn't screw it off. I had to do the following:
    1. Take the blender apart (mine had 2 screws on the bottom). 2. Remove the motor housing from the blender (mine was loose from removing the two screws earlier). 3. Remove the fan by removing the fan nut. 4. Take apart the motor housing. Mine had two machine screws with 1/4" hex heads holding a bracket that tied the two ends together. Once those two screws are removed, you can take the motor out of the housing. Be careful on the fan end of the motor, because it's got two spring loaded brushes that will come together once the motor is pulled through. 6. Once you have the motor out of the housing, you'll have something to grab onto so you'll be able to unscrew the broken coupler. I used a pair of channel locks and gently grasped the motor body, and then just used a regular pair of pliers to grab the broken coupler. It's regular thread (lefty lucy righty tighty), so twist accordingly.
    Once you have the coupler off, just put everything back together. The hardest part is holding apart the spring loaded brushes while you push the fan end of the motor shaft back through the motor housing.
    Took me about 20 minutes to do everything.
    Good luck.

    Nov 20, 2008 | Oster 4093-8 Osterizer Classic Blender...

    1 Answer

    Top part of base broke off


    This just happened to me too, and I think I just fixed it.  First you have to get a replacement part called the "blender coupling" (I got mine online from Goodmans for $3.99).  I also replaced the square drive and slinger (two parts come together for $2.99)-that's the little part that sticks up and attaches to the pitcher.
    Unscrew the bottom four screws of the base where the rubber feet are.  Remove the rubber skirt to reveal four screws that hold the motor in.  They are way in there so you'll need a long screw driver.  Remove the motor and unscrew the old coupling.  Mine had not been replaced since my grandmother bought this blender who knows when, so the coupling was really stuck.  I did not have a tool narrow enough to get a good grip to apply enough torque to remove the coupling so I had to try a few other tricks.  If your blender is the same, remove the bottom nut, fan blade and two washers.  This gave enough of a rod to grip to get the old coupling off.  (I also had to use some WD40, and heat and cool the coupling a few times to break the old seal).
    Good luck!  Hope that helps!

    Jan 09, 2008 | Oster 465 Work Top Blender

    Not finding what you are looking for?
    Oster 465 Work Top Blender Logo

    523 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Oster Blenders Experts

    Mike Cairns
    Mike Cairns

    Level 3 Expert

    3053 Answers

    Bruce Showalter

    Level 2 Expert

    79 Answers

    Dan Webster
    Dan Webster

    Level 3 Expert

    8147 Answers

    Are you an Oster Blender Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...